I'm replacing the corroded rear handle on my wagon (New England). It looks like the handle come out toward the exterior but there is that full length plastic trim piece in the way. So, i've uplugged the lights from that plastic and removed the interior trim to find ~ qty. 10 8mm studs for which I've removed the nuts. The dang plastic is still stuck on good all the way around the perimeter.
I suspect an adhesive was used. But, I searched this forum and someone circled the 8mm stud locations for removal but I didn't see the adhesive in the description.
Thought I'd ask around before I start a prying and potentially breaking parts in a downward spiral.