It goes to the dogbone mount to one of the tranny mount bolts. If I recall right.
I'll look through my picture to verify. Sorry I don't have any pictures of that area.
Ok I went out and looked, it goes to a stud on the side of the tranny near the upper edge on the passenger side. About the same plane as the fill hole. Just back from that about 9".
196k, 5/20/12 new ej257 short block, 8/20/11 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. CHECK your oil, these cars use it.
Engine Build - Click Here
Last edited by Max Capacity; 06-11-2014 at 05:52 PM..