Hicksta's Build Thread

**mr_hicksta** · #1: 02-02-2011, 05:28 AM

ELECTRONICS/TUNING
Scott Siegel ProTune
Zeitronix Zt-2 WBO2/Boost System with LCD Display
Cobb AccessPort v2 SUB-003

TURBO/INDUCTION/EXHAUST
VF52 Turbo (PnP/Ceramic Coated)
Perrin Performance Stealth TMIC
Cobb Tuning HFC Downpipe
Mach V Motorsports TGV Deletes
GrimmSpeed PnP Manifolds/HiFlow Crossover Pipe/UP
GrimmSpeed Electronic Boost Control Solenoid
GrimmSpeed 8mm Phenolic Spacers
GrimmSpeed Turbo Heat Shield
Perrin Performance Turbo Inlet Hose v1 (Black)
Samco BPV Recirculation Hose (Black)
TurboSmart Kompact BPV
IP&T Filtered Turbo/AVCS Oil Supply Line
aFe Pro Dry S Drop-in Filter

DRIVETRAIN/ENGINE/FUEL
ACT HD SS Performance Street Clutch/SMFW/TSK3 Sleeve Kit
Cobb Tuning Double Adjustable STS
Kartboy Front and Rear Shifter Bushings
Techna-Fit SS Clutch Line (Silver)
Whiteline Transmission Crossmember Bushings (W0584)
Perrin Performance Lightweight Crank Pulley (Black)
Subaru NGK Stock Heat Spark Plugs
Crawford AOS v2
Killer B Motorsports Oil Pickup
Killer B Motorsports Oil Baffle/Windage Tray
Group N Motor Mounts
Group N Transmission Mount
Group N Radiator Support Bushings
Fumoto F105S Quick Oil Drain Valve
2010 OEM STi Fuel Injectors (565cc)
DeatschWerks 65c Fuel Pump with IP&T Bracket

SUSPENSION/BRAKES
RCE Tarmac 1 Coilovers
Perrin Performance Polyurethane Front and Rear Endlinks
AVO RSB Reinforcement Brackets
Hotchkis Front (25mm) and Rear (22mm) Sway Bars
Cusco Power Steering Power Rack
Torque Solutions Driveline Carrier Bearing Support Bushings
Whiteline Front/Rear Sway Bar Bushings (W0406-24/22)
Whiteline Roll-Center/Bump Steer Kit (KCA313)
Whiteline Anti-Lift Kit (KCA334)
Whiteline Steering Rack Bushing Kit (KSR207)
Whiteline Rear Positive Traction Kit (KDT903)
Whiteline Inner Control Arm Bushing Kit (W0506)
Whiteline Front Mount - Rear Diff Bushings (KDT905)
Whiteline Rear Control Arm - Upper Outer Bushing (Camber Correction) (KCA399)
StopTech Front/Rear BBK (Argento Metallic Powder Coat)
StopTech SS Brake Lines
GrimmSpeed LGT Non-VDC MBC Brace
Hawk HPS Brake Pads

WHEELS/TIRES
Prodrive GC-010E 18x7.5/+48 (British Black)
Michelin Pilot Sport A/S Plus 225/40ZR18
ARP Extended Wheel Studs
Motorsport Technology Custom 5mm Hub Centric Wheel Spacers
Work RZ-S Open Ended Lug Nuts (Black)
Ray's Valve Stem Caps (Black)

ENGINE BLING
DressUpBolts.com Engine Bay Titanium Dress Up Kit (Black)
Redline Tuning Hood QuickLIFT Elite System
Subtle Solutions Alternator Cover (Black)
Subtle Solutions Radiator Shroud (Black)
Mishimoto Silicone Radiator Hose Kit (Black)
Prodrive Battery Tie-Down (Silver)

EXTERIOR/INTERIOR
Iluminous Designs 2008 OEM headlights (cleared/blacked out/TSX-R lenses)
JDM Legacy Rain Visors
Tint (35% Front/Rear, 15% Sunroof)
Hella Supertones (-118db)/Hella Twin Trumpets (-110db)
Subimods Hella Mounting Bracket and Subimods Relay Harness x2
TheRetrofitSource H7: Morimoto Elite HID System (4300K/35w) with Heavy Duty Relay
Toshiba 9011 HIR Hi-Beams
GrimmSpeed License Plate Relocation Kit
Interior and Exterior LEDs (Dome, map, puddle, sun visors and trunk)
JDM Dual Console Box
WC Lathe Werks Shift Knob (Black Copolymer Sphere w/ Brass Insert)
Redlinegoods.com Shift Boot/E-brake Boot/Armrest Cover (Black Perforated Leather)
Mach V Motorsports Billet Aluminum Pedals

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Pics of the whip!

Scott Siegel tuning goodness

My current alignment (3/21/13)

**W1CKED** · #2: 02-02-2011, 05:56 AM

Quote:

Originally Posted by hicksta13

Hella Supertones with Subimods mounting bracket and wire harness

Did you have to take the bumper off to wire the horns?

**PeterJMC** · #3: 02-02-2011, 05:58 AM

Nice!!! I likey

**mr_hicksta** · #4: 02-02-2011, 06:23 AM

Quote:

Originally Posted by W1CKED

Did you have to take the bumper off to wire the horns?

Yeah I did....made it a lot easier

**madcatz** · #5: 02-02-2011, 02:20 PM

....you dont HAVE to take off the front bumper. Easier yes, necessary....no

**madcatz** · #6: 02-02-2011, 02:21 PM

oh, it looks alot gayer in person......the guy who took those pictures made it look not so gay

**madcatz** · #7: 02-02-2011, 02:22 PM

BTW josh, your engine pic is outdated...where is the catch can?

**mr_hicksta** · #8: 02-02-2011, 03:16 PM

Quote:

Originally Posted by madcatz

....you dont HAVE to take off the front bumper. Easier yes, necessary....no

Yeah not completely necessary, but helps for a super clean install

Quote:

Originally Posted by madcatz

oh, it looks alot gayer in person......the guy who took those pictures made it look not so gay

Hahaha...don't hate! You

my car!!!

Quote:

Originally Posted by madcatz

BTW josh, your engine pic is outdated...where is the catch can?

Updated

**wpmarky** · #9: 02-02-2011, 03:18 PM

sick car man, go go 18g's!

**mr_hicksta** · #**10:** 02-02-2011, 03:19 PM

Quote:

Originally Posted by wpmarky

sick car man, go go 18g's!

Yessir.....I love that thing! Now I'm itching to buy more stuff

**citka** · #**11:** 02-02-2011, 03:21 PM

I'm so glad you decided to go with a FMIC!!!!

**mr_hicksta** · #**12:** 02-02-2011, 05:16 PM

Quote:

Originally Posted by citka

I'm so glad you decided to go with a FMIC!!!!

Did you install those bits yet? Let me know how they work out for you

**Max Capacity** · #**13:** 02-03-2011, 10:05 AM

Very nice, good job.

**LosAngelesLGT** · #**14:** 02-03-2011, 10:34 AM

Very similar to my car. Wish we could get you on e85 like Marky

**mr_hicksta** · #**15:** 02-03-2011, 11:07 AM

Quote:

Originally Posted by Max Capacity

Very nice, good job.

Thanks!!!

Quote:

Originally Posted by LosAngelesLGT

Very similar to my car. Wish we could get you on e85 like Marky

I had thought about going to e85, but there aren't very many stations where I'm at in VA right now. I'm trying to get stationed in San Diego next so I'll probably make the switch out there