So I spun a bearing in my obxt... Young subaru wants $4500 to replace the motor with a new shortblock. Anyone know of a shop in utah that would charge less or of somewhere I can get a rebuilt shortblock/longblock.I replaced the longblock in my '90 legacy once so if I could find a cheap longblock I could probably do it myself. I still owe 7k on the car and can get a loan for 3k if I refinance... Any suggestions help
I have a good condition EJ255 Longblock from a 2005 OBXT that was rolled. Engine ran and drove after the wreck. Leakdown test on the motor after it was removed had 7-9% leakdown in all 4 cylinders dead cold so the engine is in above average shape.