Cel p1312

**lee07** · #1: 03-07-2012, 06:48 PM

CEL light came on today and I stopped by autozone and it came up as p1312. Just had a tune done a couple a weeks ago along with the catless up and dp. Thought an tune would take care of it? Should I stop by my tuner and have him disable it or is this the egt sensor that the 2.2k resistor would take care of?

**Max Capacity** · #2: 03-08-2012, 04:27 PM

I hope you have read what that code is for.

sounds like the 2.2resistor is what you need.

Didn't your Tuner delete/block that code ?

**lee07** · #3: 03-08-2012, 04:56 PM

Just cleared the code and it's off for now. Hopefully forever but we'll see. Not sure if my tuner blocked the code but he said he can reflash it but it's already off. If it does come back, I'll have him reflash it.

**UTwrestler22** · #4: 11-05-2012, 03:51 PM

Is this the sensor on the stock UP? If so is there a walkthrough for the 2.2k ohm resistor mod?

**Max Capacity** · #5: 11-06-2012, 08:27 AM

Radio Shack sells a package of 5 for $1.25, stick one the gray connector on the passenger shock tower and be done with it.