Lets talk endlinks

**tailgatewagon** · #1: 10-12-2010, 09:20 PM

i think an info thread is needed for endlinks

please state

Car year model
endlinks used
swaybars (if non factory)

likes and dislikes....

**Maddie08** · #2: 10-12-2010, 09:50 PM

Note: Whiteline links were unavailable at the time of my ordering.

**tito_b0y** · #3: 10-12-2010, 10:09 PM

2008 2.5i Sedan
Kartboys F+R
Perrin 22mm RSB
AVO Reinforcement brackets
Rallitek 22mm FSB (not yet installed)

Nothing to complain about. I had the Perrin RSB with stock endlinks for a couple weeks before I put in the Kartboys. I was going to originally stick with the stockers for a while until I found a great deal on a full set in the classifieds. After I installed them, I noticed slightly better turn-ins as well as peace of mind.

I went with Kartboys because of their solidity, replaceable bushings and reviews throughout the forum. I didn't want OEM-style links (AVO's, Whitelines, Rallitek). I also read that Perrin's had some rusting issues that I didn't want to deal with since I'm in the Northeast.

**torinalth** · #4: 10-12-2010, 10:27 PM

07 WRX
Kartboy front, Group A rear
Progress 22mm F/R sways

Group A did well, Kartboys started to pull the poly bushing out of the front drivers one where attached to the swaybar directly.... have never heard of this aside from a couple isolated cases, but enough for me to go elsewhere.

05LGT Sedan
Rallitek links
Perrin 25mm F/R
only on week 2, so hard to say, but being a ball and socket design, I like it for not having a bushing to pull out, and the 5 year warranty makes me smile... oh, and holy hell are they beefy when next to the stock ones... everything is just beef. so far no complaints, but its early.

T

**Max Capacity** · #5: 10-13-2010, 03:00 AM

Perrin,
all stock 05 GT wagon 5mt

Stock ones were making clunking noise so I needed to replace the OEM pos with real end links.

**leftcoast74** · #6: 10-13-2010, 04:04 AM

08 SWP/5eat
Infamous Stg-2
Perrin 25mm F/R
Kartboy Solids F/R

And some other stuff...

Karboys are simple and SOLID, I did have a problem with the bushing as well, add a washer in 4 a simple fix. Do it 4 both sides in the front. IMO

**BagheeraLGT** · #7: 10-13-2010, 10:25 AM

05 GT / 5 spd
Cobb Stg II
Perrin 22mm F/R
Kartboy Solids F/R

kept stock endlinks with perrin bars.... they lasted for about 3 weeks. Went Kartboy & have had zero issues since.

**mustangendsley** · #8: 10-13-2010, 10:30 AM

05 GT/ 5 SPEED
Stage 1
Perrin 25 f/r
MSI f/r solid endlinks
I really like them, but trying to find a fine line on the bushings. The front tend to crack so far on a lot of people that have them, but lifetime garante

**fzanetti** · #9: 10-13-2010, 11:05 AM

05 LGT Wagon 5MT

Whiteline sways (F+R) plus adjustable endlinks (TBI - stock ones are clunking like a bastard).

Flavio Zanetti
Boston, MA

**Claw** · #**10:** 10-13-2010, 03:49 PM

05 LGT Wagon 5MT, Limited

Whiteline RSB, Karboy Endlinks, AVO Mounts

No problems at all.

**TSi+WRX** · #**11:** 10-13-2010, 05:21 PM

'05 LGT 5MT Ltd.
Rallitek HD endlinks
25mm front and rear Perrin
iON Sport Spec springs on factory struts/shocks

I went with the Ralliteks due to their OEM-type design, which, hopefully, will keep out the elements (big consideration here, for NE-Ohio's chemical-road-treated roadways) for at least the 5 years that they're under warranty.

**Meshanks07** · #**12:** 10-13-2010, 07:04 PM

'09 Legacy 3.0R
Perrin 25mm rear sway
Rallitek 22mm front sway
Kartboy endlinks front/rear
Rallitek springs

**peteyjr** · #**13:** 10-13-2010, 08:12 PM

05 LGT Wagon 5MT
Beefy MSI endlinks
Progress bars all around (23 mm)
Ion springs on Koni's

Great setup, Endlinks made a big difference

**PhilT** · #**14:** 10-13-2010, 08:25 PM

pos Whiteline lasted less than a year, putting the stock ones back on for the winter.

**m sprank** · #**15:** 10-14-2010, 12:13 AM

Car year model = 2008 SpecB
endlinks used = MSI
swaybars (if non factory) = Cobb

likes and dislikes.... = Awesome endlink. Bushings...