you need to start off with the basics, like running wastegate boost, taking 2-3* off the advance table, richening your open loop targets, then do the first pull so you don't blow shit up. you will need to scale the maf since you added that stupid hot-air induction cover and the k&n. i have a suggestion that would make your life a whole lot easier. get a stock filter, and put the rest of the intake back on. then you won't have to worry much about the maf scaling. using a wideband is a real good idea to confirm open loop targets and actuals. you could be running leaner than appropriate while in open loop right now.
you're logging way too many things at once.