ANYONE THAT HAS A JDM/EDM 13 BR9 or BM9

**MRLancaster** · #1: 03-20-2013, 06:29 AM

If you own a 2013 D-Type that is European or Japanese spec or know anyone that does, could you get them to measure these 3 sections.

Greatly appreciated!

**alegend90** · #2: 03-20-2013, 08:17 AM

PM the OP of this thread. He may be able to assist or know who can assist you. I saw this thread today:

http://legacygt.com/forums/showthrea...dm-203984.html

**MRLancaster** · #3: 03-20-2013, 08:42 AM

That's the AC-type.

**Higuma** · #4: 03-20-2013, 05:49 PM

Get back to you in an hour or so - - out to shovel the car out of a snowbank then will measure...

**MRLancaster** · #5: 03-20-2013, 06:36 PM

Thanks very very much!

**Higuma** · #6: 03-20-2013, 06:46 PM

Ok - these are accurate but not exact - I used a caliper and a tape measure but it's tough to judge where to start and finish because most measurements begin and end in a radius...

In short I tried to measure using the apex of the radius corners from the leading edges so they will vary from the real thing by a mm or 2...

On quick glance your front bumper looks the same in shape as mine - the hood seems to be the only glaring difference...

Yellow - 80mm

Blue - 147mm

Red - 260mm

**MRLancaster** · #7: 03-20-2013, 07:04 PM

Thanks very much! Tomorrow I will measure mine. This is another users car, the grille has been confirmed it's different sizes. So is the hood, now interested in finding out if the bumper is different.

**exbagboy** · #8: 03-20-2013, 11:47 PM

Bumper is different as well, ours protrudes more. Theirs has a sharper drop in the front.

**michelino1968** · #9: 03-22-2013, 07:47 AM

I checked my EDM MY 2010 - same measures as established by Higuma (+- 1 or 2 mm due the pieces' shape)
So headlight shape JDM/EDM 2010 = JDM 2013 (see also the swap Brainchild Customs did)