I am trying to install an Alpine amp in my trunk, using the speaker level inputs of the amp. I used the following diagram for my 14-pin connector: http://ae64.com/Legacy-pinout.htm
The trouble is, when I plug everything back in and crank the car / turn the key to the acc position, the stereo doesn't come on, but the amplifier does. I have checked the fuses, and the wiring. Everything is positive-to-positive, as it should be.
Does anyone know what could be causing this, or has anyone experienced this before? If the topic has already been addressed, link your boy Water Bear to the complete coverage. Thanks in advance.