Tuning in Queens?

**TheMahFromTheU** · #1: 02-28-2013, 09:28 AM

Good Morning All,

I'm in the process of building my LGT, I've opted for VF48 rather then VF52, with 650cc injectors, process west TMIC, SPT exhaust, Invidia up/downpipe (catless)...

Where can a fellow go to get tuned in Queens? Or do I really need to drive to EFI Logic in CT?

**Perscitus** · #2: 02-28-2013, 02:56 PM

Try these two:

M.R. Performance
84 New York Ave, Westbury NY
516.280.7211
http://www.mrpbuilt.com/

M.R. Performance works in association with Visconti Tuning in CT
John is the Master Tuner @ Visconti and tunes cars out in Westbury to.
Tell him Mike with the 3.6 H6 sent you.

Visconti Tuning
191 Post Road West, Westport CT
203.856.9946
http://www.vtune.us

**jasejase** · #3: 02-28-2013, 03:07 PM

If you're going to CT, you have a few options here as well... Including EFI, which has been rotating in some great tuners.

**AZP Installs** · #4: 03-01-2013, 05:59 AM

Dave at metric is our go to tuner in LI. Known him for 10+ years.

-Mike Paisan

11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.
Call directly as We carry almost every manufacturer now, so before you buy parts call us.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"

**TheMahFromTheU** · #5: 03-01-2013, 11:08 AM

Fellas, thanks so much for the suggestions. Any recommendations on how to break in the motor?

**system60** · #6: 03-06-2013, 10:46 AM

Quote:

Originally Posted by Perscitus

Try these two:

M.R. Performance
84 New York Ave, Westbury NY
516.280.7211
http://www.mrpbuilt.com/

M.R. Performance works in association with Visconti Tuning in CT
John is the Master Tuner @ Visconti and tunes cars out in Westbury to.
Tell him Mike with the 3.6 H6 sent you.

Visconti Tuning
191 Post Road West, Westport CT
203.856.9946
http://www.vtune.us

There's also the other John at MR that does OS tuning, both Ryan and him are great to deal with.

**jasejase** · #7: 03-06-2013, 01:01 PM

any reason why my post was deleted??

**TheMahFromTheU** · #8: 04-10-2013, 08:19 AM

Hey all, I have another question about tuning? So as I said my motor is totally being rebuilt, the car has stock dp/up but I plan on installing new motor along with new dp/up with exhaust - my question is once all of this is installed should I get tuned from jump or break in the motor first then get tuned?

**jasejase** · #9: 04-10-2013, 10:20 AM

i would say break it in properly. cant hurt.

**TheMahFromTheU** · #**10:** 04-10-2013, 10:29 AM

Quote:

Originally Posted by jasejase

i would say break it in properly. cant hurt.

I was kinda thinking the samething because I was told I cant really drive the car hard/fast they said maxium 40mph.

**jasejase** · #**11:** 04-10-2013, 10:42 AM

isnt it more of an rpm...

**TheMahFromTheU** · #**12:** 04-10-2013, 11:06 AM

Quote:

Originally Posted by jasejase

isnt it more of an rpm...

I drive a 5EAT

**AZP Installs** · #**13:** 04-10-2013, 04:08 PM

If you don't have a stock setup, you need a base-tune/breakin map in order to break it in properly. Then have the car re-checked over and pro-tuned after breakin.

-Mike Paisan

11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.
Call directly as We carry almost every manufacturer now, so before you buy parts call us.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"

**TheMahFromTheU** · #**14:** 04-11-2013, 08:52 AM

Quote:

Originally Posted by AZP Installs

If you don't have a stock setup, you need a base-tune/breakin map in order to break it in properly. Then have the car re-checked over and pro-tuned after breakin.

-Mike Paisan

11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.
Call directly as We carry almost every manufacturer now, so before you buy parts call us.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"

Is it safe to drive the car once its done to a shop that can provide me with such a map? This car is going through a total transformation..

**AZP Installs** · #**15:** 04-11-2013, 08:54 AM

I wouldn't.

When we do a motor replacement/upgrade or even certain bolt-ons we require the customers to get a base map prior to us even starting the car up.

You can drive with no map forever, but it isn't a good idea.

-Mike Paisan

11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.
Call directly as We carry almost every manufacturer now, so before you buy parts call us.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"