2.5GT_dude Posted December 26, 2009 Share Posted December 26, 2009 My friends legacy more than likely has torque bind and we were wanting to know if disengaging the AWD would help from damaging the car more and would it be fine to leave the FWD fuse in until the car is fixed to prevent further damage. Link to comment Share on other sites More sharing options...
jerseyglock Posted December 26, 2009 Share Posted December 26, 2009 If you look at the back of fuse panel, there may not have any wires / connectors for FWD. I've checked my fuse panel and found none. On the older (prior 05) you should be able to. Link to comment Share on other sites More sharing options...
2.5GT_dude Posted December 27, 2009 Author Share Posted December 27, 2009 it has the FWD box where i can add the fuse....my question is: How long and safe is it too run the car on FWD only til the problem is fixed? Link to comment Share on other sites More sharing options...
custom_junky Posted December 27, 2009 Share Posted December 27, 2009 this is a bad idea...the center transfer case will not like you since it connects the front and rear diff... Link to comment Share on other sites More sharing options...
Dan_K Posted March 29, 2011 Share Posted March 29, 2011 You will most likely overheat and destroy the center diff. Link to comment Share on other sites More sharing options...
ShrinerMonkey Posted March 30, 2011 Share Posted March 30, 2011 Dude, this is a 2 YEAR OLD thread.... back from the dead. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.