TDC Tuning Posted January 15, 2007 Share Posted January 15, 2007 Shin is in japan we have access to ANY JDM bumper or accessory he is leaving in early FEB if you want a bumper and have cash to spend please contact me about it and we can get it rolling i need a definate number to tell them by the end of the week to get pricing but it will be good. The bumpers will be coming on a boat there will be a wait but ittl be worth it TDC Tunings LGT Forum Cobb, Perrin, APS, Invidia, Megan racing and MORE!! Your #1 source For Subaru / Legacy GT performance parts! Link to comment Share on other sites More sharing options...
fweasel Posted January 15, 2007 Share Posted January 15, 2007 Ballpark pricing? Do they come painted? ignore him, he'll go away. Link to comment Share on other sites More sharing options...
TDC Tuning Posted January 15, 2007 Author Share Posted January 15, 2007 i don't know yet but you should pick a bumper and let me know (it all depends how many i buy) i DOUBT they will come painted because its far easier to match paint here @ a shop than from japan TDC Tunings LGT Forum Cobb, Perrin, APS, Invidia, Megan racing and MORE!! Your #1 source For Subaru / Legacy GT performance parts! Link to comment Share on other sites More sharing options...
JBLU24 Posted January 15, 2007 Share Posted January 15, 2007 how hard is it gonna be to fit a jdm bumper (and beam?) over my fmic?? Link to comment Share on other sites More sharing options...
fweasel Posted January 15, 2007 Share Posted January 15, 2007 Ah, yes, aftermarket. I immediately assumed Subaru JDM bumpers. Whoops... ignore him, he'll go away. Link to comment Share on other sites More sharing options...
TDC Tuning Posted January 15, 2007 Author Share Posted January 15, 2007 These bumpers will fit over 99% of the fmic Mine Perrin mts all u need is a modded beam (i may be supplying those too) TDC Tunings LGT Forum Cobb, Perrin, APS, Invidia, Megan racing and MORE!! Your #1 source For Subaru / Legacy GT performance parts! Link to comment Share on other sites More sharing options...
Guest Posted January 15, 2007 Share Posted January 15, 2007 i don't know yet but you should pick a bumper and let me know (it all depends how many i buy) i DOUBT they will come painted because its far easier to match paint here @ a shop than from japan Jon, OEM JDM bumpers came PREPAINTED. 100% sure. I could be in for a prepainted one if price is right... sending pm. Link to comment Share on other sites More sharing options...
TDC Tuning Posted January 15, 2007 Author Share Posted January 15, 2007 Jon, OEM JDM bumpers came PREPAINTED. 100% sure. I could be in for a prepainted one if price is right... sending pm. I didn't intend on getting OEM JDM bumpers unless people want them specifically im speaking about Aftermarket stuff i can get OEM as well TDC Tunings LGT Forum Cobb, Perrin, APS, Invidia, Megan racing and MORE!! Your #1 source For Subaru / Legacy GT performance parts! Link to comment Share on other sites More sharing options...
Guest Posted January 15, 2007 Share Posted January 15, 2007 I didn't intend on getting OEM JDM bumpers unless people want them specifically im speaking about Aftermarket stuff i can get OEM as well Ah, I see. I pmed you about OEM JDM SpecB Rev. A-C bumper... the hot one: http://www.calkowski.net/pix/specb/p1.jpg http://www.calkowski.net/pix/specb/p2.jpghttp://www.calkowski.net/pix/specb/p4.jpghttp://www.calkowski.net/pix/specb/p5.jpghttp://www.calkowski.net/pix/specb/p6.jpg Link to comment Share on other sites More sharing options...
Deer Killer Posted January 15, 2007 Share Posted January 15, 2007 Is there a used market there to tap into? I'd settle for any brilliant silver that fits oem fogs and doesn't artificially lower my ride height (i.e. hideous) Must be with so many aftermarket options.. Normal wear is fine, as long as it hasn't been in an accident, etc.. It really all depends on the price.. Link to comment Share on other sites More sharing options...
TDC Tuning Posted January 15, 2007 Author Share Posted January 15, 2007 ill try to see if used is possible ! TDC Tunings LGT Forum Cobb, Perrin, APS, Invidia, Megan racing and MORE!! Your #1 source For Subaru / Legacy GT performance parts! Link to comment Share on other sites More sharing options...
SQC049 Posted January 15, 2007 Share Posted January 15, 2007 I want a JDM Spec B front bumper and JDM sedan rear bumper. PM me pricing on Hippo Sleek and K2 gear if you would. Thanks Super JDM part out: http://legacygt.com/forums/showthread.php?t=65039 PM me an offer! Link to comment Share on other sites More sharing options...
VXCL Posted January 16, 2007 Share Posted January 16, 2007 Ah, I see. I pmed you about OEM JDM SpecB Rev. A-C bumper... the hot one: http://www.calkowski.net/pix/specb/p1.jpg my lgt needs this front end when i have the rear molded smooth and repainted. clean, oem, and sexy ftW!!! MAYHEM #122/22 STS NNJR SCCA AUTOX4U.COM XENON RETRO GUIDE Link to comment Share on other sites More sharing options...
wrxlvr Posted January 16, 2007 Share Posted January 16, 2007 PM'd you with my request. http://clem.mscd.edu/~mcquiggc/reiz.jpg Link to comment Share on other sites More sharing options...
Underdog Posted January 17, 2007 Share Posted January 17, 2007 arg... the k2 with the lip spoiler/fogs/grille or the jdm spec. b would be a welcome change from stock... If the price was really good I would jump on this opportunity! In for pricing... The Crimson Dynamo Link to comment Share on other sites More sharing options...
lookslikeanevo Posted January 17, 2007 Share Posted January 17, 2007 damn i can only dream about that k2 bumper Current:MY05 SWP wagon - 253/290 UP, AEM CAI, Invidia Q300, tuned@yimisport OLD: MY06 GRP - 274/314 Link to comment Share on other sites More sharing options...
Codean Posted January 20, 2007 Share Posted January 20, 2007 It would really help if you just rounded up some prices of the bumpers listed already and post them up here. It give a better idea of what to expect for a price total. Link to comment Share on other sites More sharing options...
edkwon Posted January 20, 2007 Share Posted January 20, 2007 PM'd you with my request. http://clem.mscd.edu/~mcquiggc/reiz.jpg Yep i'm interesting in this bumper as well so i dont have to deal with JDM foglamps. Ed Link to comment Share on other sites More sharing options...
flander Posted January 20, 2007 Share Posted January 20, 2007 Does anybody have pictures or a site with just the bumpers on it. I just got frontend damage Wednesday and haven't gone to a bodyshop yet. This would be the perfect time to get JDM bumper for the front. I like a clean front end with foglights. Would we also be able to get the JDM beams too? I don't want any front plate brackets at all on mine since they are not needed in Michigan. Link to comment Share on other sites More sharing options...
wrxlvr Posted January 21, 2007 Share Posted January 21, 2007 It would really help if you just rounded up some prices of the bumpers listed already and post them up here. It give a better idea of what to expect for a price total. Agreed. Especially since I haven't heard back (no return PM). Link to comment Share on other sites More sharing options...
BigT Posted January 22, 2007 Share Posted January 22, 2007 Ah, I see. I pmed you about OEM JDM SpecB Rev. A-C bumper... the hot one: http://www.calkowski.net/pix/specb/p1.jpg http://www.calkowski.net/pix/specb/p2.jpghttp://www.calkowski.net/pix/specb/p4.jpghttp://www.calkowski.net/pix/specb/p5.jpghttp://www.calkowski.net/pix/specb/p6.jpg +1 interested in pricing. Link to comment Share on other sites More sharing options...
flander Posted January 22, 2007 Share Posted January 22, 2007 +1 interested in pricing. Me too, plus bumper beam too. Link to comment Share on other sites More sharing options...
abakja1 Posted January 26, 2007 Share Posted January 26, 2007 ^^^ Me three in Obsidian Black would like pricing,...Price shipped to Honolulu, Hawaii (HI) 96818? Also, can he find out about shipping by air to me as well?? If it is to arrive by boat if its at a way better price, and he is leaving in February,..Are we talking April or May delivery to Hawaii?? Link to comment Share on other sites More sharing options...
wrxlvr Posted January 26, 2007 Share Posted January 26, 2007 Has anyone heard back on pricing? Cause I sure haven't. Link to comment Share on other sites More sharing options...
S0CalGT Posted January 29, 2007 Share Posted January 29, 2007 A little off topic, but will JDM bumpers clear the US front mount intercooler kits currently out or will it require quite a bit of trimming? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.