Jump to content
LegacyGT.com

I got me a Leggy Gee-Tee


Recommended Posts

Got myself into a Legacy GT. After having lots & lots of Subarus (OBS, RS, RSTi, 2 WRXs) I went to this. I always had a thing for them. Especially in black! So I found this one in Boston with 130k miles, all stock, & had it shipped here. I usually always do the same mods to my Subaru's & make them how I like them.

It's a very solid car with barely any problems.

 

Red: completed items

Blue: bought but not installed

 

What to fix:

Paint-needs a good buffing!

Hood might need re-painting - LOTS of scratches & chips

Seats need shampooing

Powersteering-could be low & loose belt-little hard to tun at low speeds

Both front CV axle

Alignment

Keyfob

Maintenance

Plugs, drop in filter, banjo bolt filters, cabin filter, front rotors, thermostat, coolant reflush, PCV valve, tranny fluid

MODS:

Power

Catback

Downpipe

Upipe

Accessport & protune

VF52

Drop in filter & remove silencer

Walbro

Suspension/Wheels

Tein springs

Rear swaybar/endlinks

Volk CE28 replicas

Sumitomo HTR Z II

Drivetrain

Short shifter

Whiteline steering rack bushings

Exterior

Roll guards

Paint the wheels & calipers

Rally Armors

New headlights then black them (both of mine are cracked)

Tint

AVO grille

Roof spoiler

Interior

Boost gauge

AEM wideband install

All weather mats

Black suede headliner/pilars

 

Probably ad some things here & there along the way. Car runs & drives really nice!

 

http://i.imgur.com/qXRwCWn.jpg

http://i.imgur.com/NKsstTk.jpg

http://i.imgur.com/5PCs0gI.jpg

http://i.imgur.com/oTx2sBj.jpg

http://i.imgur.com/AIBysOT.jpg

 

 

What it looks like now:

http://i.imgur.com/64XbOBF.jpg

Link to comment
Share on other sites

  • Replies 50
  • Created
  • Last Reply

Your power steering issue is most likely the o-ring on the inlet side. Very common problem.

 

Good looking car though! You seem to know exactly what you want to do with this car. Any reason you chose tein springs over coilovers or other spring choices?

2005 Vader Wagon

Material Tests on Ringland Failure Piston

I should have held off and purchased a wagon instead of the spec.B
Link to comment
Share on other sites

May look like a corndog but it makes shifting the best

 

when the look and feel is similar to that of your own Im sure shifting is much more pleasurable :lol: Im just joking with ya buddy welcome to the world of #YNANSB!

03 WRB WRX (RIP)

04 JBP STI (sold)

07 DGM Legacy GT (RIP)

12 OBP STI (DD)

Link to comment
Share on other sites

^ both of my headlights are cracked. I've heard crappy things about depos & I also had some for my bugeye & they sucked. So probably not going that route. I'll most likely end up getting new oem ones. Then take my old ones & practice blacking them. Then do it to the good ones.

 

Sorry for the lack of updates. Been very very busy! I picked up this little guy & he's a handful!

http://i.imgur.com/r3KcCn0.jpg

 

I also re-painted my grill & found out my powersteering was just really low.

http://i.imgur.com/yc4IptH.jpg

Link to comment
Share on other sites

Changed teh tranny fluid today. Shifts like butter now!! 2nd & 3rd were a bit hard to get into at times but now it's all perfect. Really glad I changed it! Didn't find many shavings on the plug. Also put some LED's inside! One of the best bang for your buck mods

http://i.imgur.com/hoxwidD.jpg

http://i.imgur.com/lNDaDUC.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.




×
×
  • Create New...

Important Information

Terms of Use