michael11 Posted March 4, 2011 Share Posted March 4, 2011 I have a 2.2 here for a project. I have the flywheel off and want to replace the separator. Thanks to JohnEgg I have this link: http://beergarage.com/SubySeparator.aspx A few questions though... Why is one bolt different? I think that the motor I have is a 1993.. Same parts?? Thanks PS- The engine number is 818465 THANKS!!! Link to comment Share on other sites More sharing options...
johnegg Posted March 4, 2011 Share Posted March 4, 2011 i don't know exactly, maybe the threads go through to the oil chamber. in other words, maybe the other bolt holes have a bottom and that does not. just a guess. the odd bolt comes with some kind of ''thread lock'' or sealant on it. Link to comment Share on other sites More sharing options...
michael11 Posted March 4, 2011 Author Share Posted March 4, 2011 i don't know exactly, maybe the threads go through to the oil chamber. in other words, maybe the other bolt holes have a bottom and that does not. just a guess. the odd bolt comes with some kind of ''thread lock'' or sealant on it. Thanks John. Looking at those pics. I do see an arrow pressed in the cover pointing to where the oddball goes... Link to comment Share on other sites More sharing options...
SBT Posted March 10, 2011 Share Posted March 10, 2011 Yeah - the oddball one goes where the arrow is pointing and has threadlock on it from the factory (or should have it). - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
SBT Posted March 10, 2011 Share Posted March 10, 2011 More information here Not sure if that's the most recent P/N, but use that one and you should find the most recent one as a replacement. - Pro amore Dei et patriam et populum - Link to comment Share on other sites More sharing options...
babybaluga32 Posted March 10, 2011 Share Posted March 10, 2011 The phase 1 block oil separator plate uses philip screws and the phase 2 uses alan screws.. Dont know if thats even relevant, but i found that out tonight Never mind.... I read what you wrote! But now I know I have to change mine!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.