StringFellow Posted January 24, 2006 Share Posted January 24, 2006 I have a sirius tuner installed in the cubby and I used velcro to attach the turner to the back of the cubby. The problem is that the turner is too far back in the cubby and is hard to reach to change channels, etc. I tried using the included remote, but I have to hold it up high in order for the signal from the remote to tranmit over the front lip of the cubby. Has anyone moved their satellite radio tuner forward in the cubby. I also still want to close the cubby when needed. Is there a real hard form rubber that I could purchase and cut to fix the cubby? If so, where could I get it. Soft foam rubber is just too soft and isn't a good firm mounting surface. Suggestions. Thanks. Link to comment Share on other sites More sharing options...
c-lo Posted January 24, 2006 Share Posted January 24, 2006 how bout a block of wood. paint it black 258k miles - Stock engine/minor suspension upgrades/original shocks/rear struts replaced at 222k/4 passenger side wheel bearings/3 clutches/1 radiator/3 turbos Link to comment Share on other sites More sharing options...
danbart Posted January 25, 2006 Share Posted January 25, 2006 Usa a "project box" from radio shack and just use velco on both sides of the box. They come in a variety of sizes. Link to comment Share on other sites More sharing options...
BadMojo Posted January 25, 2006 Share Posted January 25, 2006 Thanks danbart, I hadn't thought of the project box solution but that is a great idea as I was considering doing this as well. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.