rkhousman Posted December 5, 2012 Share Posted December 5, 2012 Picked up a JL audio Cleansweep and though the Kid that I bought it from says it was never used he also stated that he bought it from a coworker. Wondering if anyone that has one knows how to test it so I can ensure it works. Guessing that the only way to do so without installing which I have no way to do a complete install at this time is to check using someone elses setup. So does anyone in my area have one installed that wouldn't mind hooking mine up so we can check that it works. Link to comment Share on other sites More sharing options...
I Donated Too sigmafour Posted December 10, 2012 I Donated Too Share Posted December 10, 2012 You can wire it to the L/R output of any home amplifier that drives regular speakers (within reason, nothing with MASSIVE output just in case! just don't CRANK the house amp!) and make sure you get an output from the RCA's as you expect... do you have a second amp or something to take those RCA's and listen to their output? Link to comment Share on other sites More sharing options...
rkhousman Posted December 12, 2012 Author Share Posted December 12, 2012 Unfotunatley don't have any home audio equip. I want to install in the lgt but $$ is a big obsticle at the moment and I need an amp and to upgrade all speakers! Link to comment Share on other sites More sharing options...
I Donated Too sigmafour Posted January 8, 2013 I Donated Too Share Posted January 8, 2013 How you getting on with this project... had a chance to test it yet with anything? Link to comment Share on other sites More sharing options...
rkhousman Posted January 8, 2013 Author Share Posted January 8, 2013 Nah been busy and haven't found a way to test fully yet Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.