Theride Posted October 7, 2011 Share Posted October 7, 2011 maybe im missing something here but how do you know you have adjusted your shocks on all four corners equally, minus full soft or full hard? It seems there is no reference point. I keep reading these "clicks" im supposed to feel but mine seems to be smooth turns through out the entire range. Link to comment Share on other sites More sharing options...
bnguyenbb6 Posted October 8, 2011 Share Posted October 8, 2011 Konis dont,click. They turn about 3.5 turns. You just have to use the arrow as a referece amd eyeball it Link to comment Share on other sites More sharing options...
soloz2 Posted October 8, 2011 Share Posted October 8, 2011 Only 2 full turns. Clicks would be nice though... But then they would have less customizability. Current: 16 Crosstrek Premium w/ Eyesight & 05 Outback XT 5MT Past Subies: 14 FXT Premium, 14 WRX hatch, 06 Legacy 2.5i SE 5MT, 98 Outback wagon Link to comment Share on other sites More sharing options...
goneskiian Posted October 11, 2011 Share Posted October 11, 2011 Yup. No clicks. You turn them to full soft or full stiff and go by how much you turn each one (i.e. 1/4 turn, 1/2 turn, 1 1/4 turn, etc.) Link to comment Share on other sites More sharing options...
SpooksRex Posted December 31, 2012 Share Posted December 31, 2012 how do you know when you hit full stiff / soft? will the piston actually stop turning? I'm installing mine now and I want to make sure that I adjust them correctly. I have an O5 LGT wagon with stock springs. My end goal is probably middle of the road; not to soft, not to stiff. I'm looking for a sporty suspension over the stock suspension. Link to comment Share on other sites More sharing options...
AZP Installs Posted December 31, 2012 Share Posted December 31, 2012 They will stop turning in both directions when you hit the end. Usually we start on full soft and work our way up from there in 1/4 turn increments. -Mike Paisan http://www.pbase.com/paisan/image/91072632.jpg http://www.pbase.com/paisan/image/145749898/original.jpg http://www.pbase.com/paisan/image/133406601.jpg http://www.whiteline.com.au/images/logos/perf1.jpg 11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts. Call directly as We carry almost every manufacturer now, so before you buy parts call us. Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs "Race Tested, Enthusiast Approved!" Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.