G5892 Posted January 18, 2013 Share Posted January 18, 2013 Ok, my accessport is only storing about 1/4 of the logs that I do, and the rest never gets recorded. This happens at random, and I dont know how to recreate or fix the problem. Before I do a log, I'm in the live data mode and I hit the "ok" button and wait until "initializing" goes to "logging". Then after the log, I press the "ok" button again. When I pull the logs from the accessport to the computer, via accessport manager, I get this (see attachment). I first wanted to see if anyone had these problems/solution, then I'll talk to Cobb about it. My Accessport has the latest updates btw. My Log List: -Boost -Load -DAM -Feedback Knock -Fine Learning Knock -Ignition Timing -Knock Sum -MAF -MAF Volt -RPM -Throttle Position -Wastegate Duty Cycledatalog3.csvdatalog4.csv Link to comment Share on other sites More sharing options...
BX77 Posted January 18, 2013 Share Posted January 18, 2013 Did you post this on the Cobb forum? Link to comment Share on other sites More sharing options...
G5892 Posted January 18, 2013 Author Share Posted January 18, 2013 Did you post this on the Cobb forum? I just recently sent a email Cobb technical support. Link to comment Share on other sites More sharing options...
BX77 Posted January 18, 2013 Share Posted January 18, 2013 If you post on thier Forum, Bill answers question 2x a day, quicker then Tech Link to comment Share on other sites More sharing options...
G5892 Posted January 18, 2013 Author Share Posted January 18, 2013 Just an update if anyone cares, I tried to pull the logs off the AP this morning and everything came out correctly (see attachment). Idk why its coming out correct now, but not yesterday.datalog7.csv Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.