jiffy_jan Posted December 4, 2011 Share Posted December 4, 2011 Hi everyone, I was replacing my downpipe on my '05 LGT Wagon 5MT and when I pulled apart the connector for the rear 02 sensor, the 4 pins fell out and now I don't know what order to put them back into the connector! The exact connector in question is a green connector (4 pin) and it's on the short wire harness. It's about 6 inches long and has a gray connector on the other side. This is mounted to a bracket on the transmission. Anybody able to help? I can post a picture if it would help. Thanks so much! Link to comment Share on other sites More sharing options...
__raj Posted December 5, 2011 Share Posted December 5, 2011 search forum: vacation pix Link to comment Share on other sites More sharing options...
Max Capacity Posted December 5, 2011 Share Posted December 5, 2011 I PM'ed him last night. Sorry I didn't post it. 305,600miles 5/2012 ej257 short block, 8/2011 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. (SOLD). CHECK your oil, these cars use it. Engine Build - Click Here Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.