Burba88 Posted January 26, 2013 Share Posted January 26, 2013 I bought a torque solutions tmic and it feels like its impossible to get a nice fit on the throttle body side. I tried the stock one seemed to work ok but still doesn't seem like a good fit and so I ordered a avo silicone hose for it put that on last night and tinker pippin off the throttle body because of the angle of the hose but I finally got it on its barly on the throttle body but as of now no leaks. Does anyone have any advice for this issue or something better to do ? KMT Tuned Link to comment Share on other sites More sharing options...
Max Capacity Posted January 26, 2013 Share Posted January 26, 2013 My IPr needs to be put on the TB hose after you get the perfect angle on the new OEM hose. It needs to be put in the hose just far enough to get the clamp to hold when tightened really tight. Then push it around and line it up on the turbo. It can be done just not easy to do. If you have a friend to help that may be a + 305,600miles 5/2012 ej257 short block, 8/2011 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. (SOLD). CHECK your oil, these cars use it. Engine Build - Click Here Link to comment Share on other sites More sharing options...
Drift Motion Posted January 26, 2013 Share Posted January 26, 2013 Buy a legit TMIC? Sent from my Nokia 8250 using Tapatalk 2 Link to comment Share on other sites More sharing options...
Burba88 Posted January 27, 2013 Author Share Posted January 27, 2013 Yeah my avo hose is holding up good looks like its falling off throttle body but its not leaking yet lol KMT Tuned Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.