Visionhu Posted September 29, 2009 Share Posted September 29, 2009 Just got my hands on an almost new Kenwood OEM navigation set out of a European 2008/09 Legacy. Exactly like this: The good news: - dual A/C working - radio working - display working - navi working - DVD working The bad news: - the info system on fuel, trip are not working Got the whole car ('05 USDM GT) rewired this weekend, might consider the above functions as success, but really would like have it working perfectly. The back of the main unit looks identical to the OEM STi '08 navi radio: http://img23.imageshack.us/img23/9895/200809133747420906rc2.jpg The 24 pin connector marked with a red circle on the left is a mystery to me. According to the pin-out, pin 6 and 18 are wired to CAN signals (CAN low and high). I am thinking of, the main unit gets the fuel and trip data through CAN (??) I had a look at the service manuals of my '05 USDM LGT's clock section, but didn't find anything related to CAN or OBDII... Do we have CAN low and high signals I can acquire at the OBDII connector? Or should I try somewhere else? Anybody has access to EDM service manuals for 08/09 Legacy/Outback? Or maybe Kenwood service manuals? Link to comment Share on other sites More sharing options...
atmurray Posted October 6, 2009 Share Posted October 6, 2009 I posted a thread on here a while back documenting that plug but can't find it on here. I have a feeling this might help you though: http://forum.liberty.asn.au/viewtopic.php?f=22&t=3505 Not only did I document the CAN pins, but there are a few other nice tweaks you're going to love! Link to comment Share on other sites More sharing options...
Visionhu Posted October 7, 2009 Author Share Posted October 7, 2009 (edited) Thanks, that helped a lot! Update: case closed, everything works just fine Edited October 7, 2009 by Visionhu Link to comment Share on other sites More sharing options...
hatemtaher Posted March 23, 2010 Share Posted March 23, 2010 hello, my legacy dosent have the dvd or navigation lcd..so i want to ask you from where can i buy both of them...if u have the source u will make me so happy... thanks Link to comment Share on other sites More sharing options...
5150LGT Posted January 24, 2016 Share Posted January 24, 2016 Hello i have the same nav unit, but i cant find the pin out for the 12 pin connector on the back of the screen. Most of them go to the green plug on the back of the radio, but i need to know where the purple wire, the blue/red wire, the black/yellow, and the black/white wire goes. Link to comment Share on other sites More sharing options...
muta Posted October 17, 2019 Share Posted October 17, 2019 Hello , would you tell me how can I connect rear view camera on this module ? http://ae64.com/images-e41/Subaru_Kenwood_nav_rear.jpg Link to comment Share on other sites More sharing options...
Brunzo Posted October 18, 2019 Share Posted October 18, 2019 Look for "subaru rear view cam adapter" (on aliexpress) with 8 pin plug if your wiring does not have it. Or 8 pin plug: 1 pin - video signal 5 & 6 pins - ground 24pin plug should already contain backup light wire (brown/yellow) for reverse gear in pin 5. Link to comment Share on other sites More sharing options...
bigBADbenny Posted October 18, 2019 Share Posted October 18, 2019 PostFL FSM: Subaru Parts, Procedures, Diagnostics & FSM Info • club.liberty.asn.au http://forum.liberty.asn.au/viewtopic.php?f=6&t=34980 Link to comment Share on other sites More sharing options...
muta Posted October 18, 2019 Share Posted October 18, 2019 Look for "subaru rear view cam adapter" (on aliexpress) with 8 pin plug if your wiring does not have it. Or 8 pin plug: 1 pin - video signal 5 & 6 pins - ground 24pin plug should already contain backup light wire (brown/yellow) for reverse gear in pin 5. So. Would I need a narness like this http://www.uklegacy.com/forums/uploads/monthly_06_2016/post-50931-0-29381200-1466996700.jpg or https://www.aliexpress.com/item/32508686145.html?spm=a2g0o.productlist.0.0.4d0f6161D8qMBE&algo_pvid=2e101022-d7f5-4094-9919-befc8e36b640&algo_expid=2e101022-d7f5-4094-9919-befc8e36b640-1&btsid=234d33a7-83ea-465e-8237-08dc8e0eb35d&ws_ab_test=searchweb0_0,searchweb201602_2,searchweb201603_52 is enough or this https://car-solutions.com/en/cable-for-rear-view-camera-connection-in-subaru-2008-2015/ Thanks in advance Link to comment Share on other sites More sharing options...
Brunzo Posted October 18, 2019 Share Posted October 18, 2019 small harness is for aftermarket rearview cam if your socket is empty. big harness (more expensive) is for genuine rearview cam, which requires power (red wire) from headunit and your socket is not empty. You can also purchase more expensive wiring but not use additional wires (red and black - but you have to isolate contacts). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now