LegacyDan Posted December 12, 2012 Share Posted December 12, 2012 I currently have a fairly custom turbo back system. With a Milltek catless shorty DP and sports cat lower section followed by a Fujitsubo CBE. if i was to switch back to standard center y section and two standard/after market mufflers what affect would this have on power levels? Im thinking of putting on a less in your face set of mufflers and cant do that without butchering up CBE which i dont want to do or else switch back to stock setup. Answers on a postcard! They kind of attract a bit of un-wanted attention http://i32.photobucket.com/albums/d3/desperatedano/IMG_20120909_191256.jpg http://i32.photobucket.com/albums/d3/desperatedano/IMG_20120909_191304.jpg Whats the aftermarket muffler of choice these days? Link to comment Share on other sites More sharing options...
iNVAR Posted December 12, 2012 Share Posted December 12, 2012 Wish I had a rear wiper. Anything behind where your 2nd (rearmost) cat used to be shouldn't impact performance much, if at all. Link to comment Share on other sites More sharing options...
I Donated thefultonhow Posted December 12, 2012 I Donated Share Posted December 12, 2012 From what I understand, the mid/Y is restrictive; the cans are not. Link to comment Share on other sites More sharing options...
LegacyDan Posted December 17, 2012 Author Share Posted December 17, 2012 Wish I had a rear wiper. Anything behind where your 2nd (rearmost) cat used to be shouldn't impact performance much, if at all. I might take it off actually, its kind of in the way of your rear view and ruins the lines of the car I think. So how much restriction are we talking about switching back to stock CBE? Link to comment Share on other sites More sharing options...
scoobydoobie Posted December 17, 2012 Share Posted December 17, 2012 In for more discussion.. Link to comment Share on other sites More sharing options...
LegacyDan Posted December 21, 2012 Author Share Posted December 21, 2012 so im thinking of two options now. 1. modify the current Fujitsubo LEGALIS-R to pull the tips in more so they dont stick out as far, hopefully this will look less in your face compared to how they are now, im thinking this CBE maybe wagon fitment hence why it sticks our past the bumper so much. Will pulling it in closer to the bumper cause any heat damage? http://i32.photobucket.com/albums/d3/desperatedano/IMG_20120909_191247.jpg 2. Change to a Invidia Q300 quad tip CBE, its looks a lot more subtle i think. Does anyone know how loud this is and what the quality of the latest v3 is like? My Fujitsubo one is 8 years old and not a sign of rust or any scratches on it so im looking for something that is good quality and not going to rust up after 1 or two years Link to comment Share on other sites More sharing options...
fahr_side Posted December 21, 2012 Share Posted December 21, 2012 From what I understand, the mid/Y is restrictive; the cans are not. OP has 2.0 liters displacement than you guys... Quite a bit less exhaust volume to deal with. Obligatory '[URL="http://legacygt.com/forums/showthread.php/2008-gh8-238668.html?t=238668"]build thread[/URL]' Increased capacity to 2.7 liters, still turbo, but no longer need spark plugs. Link to comment Share on other sites More sharing options...
Drift Motion Posted December 21, 2012 Share Posted December 21, 2012 why not some quad tip mufflers? Usually oval cans attracts a lot less attention than canons, plus it clears curbs a lot easier too! And the tinted tails doesn't help... Link to comment Share on other sites More sharing options...
LegacyDan Posted December 21, 2012 Author Share Posted December 21, 2012 Only quad tip mufflers I have came across are the invidia ones but as far as I know there are only sold as a part of a full CBE. Link to comment Share on other sites More sharing options...
Drift Motion Posted December 21, 2012 Share Posted December 21, 2012 you can just get two dual tip mufflers and have them welded in locally I have the invidia q300, it's awesome, and quiet Link to comment Share on other sites More sharing options...
LegacyDan Posted December 21, 2012 Author Share Posted December 21, 2012 you can just get two dual tip mufflers and have them welded in locally I have the invidia q300, it's awesome, and quiet Quiet is good. I haven't seen any dual tip mufflers only. Selection locally is pretty shit. Considering most of my cat parts come from either US or japan says a lot for the local stuff! Link to comment Share on other sites More sharing options...
Drift Motion Posted December 21, 2012 Share Posted December 21, 2012 LOL I know magnaflow makes some, as well as aspec blastpipes. Not sure if you can source there over there...haha Link to comment Share on other sites More sharing options...
LegacyDan Posted January 1, 2013 Author Share Posted January 1, 2013 any pics of it on the car? Link to comment Share on other sites More sharing options...
Drift Motion Posted January 1, 2013 Share Posted January 1, 2013 only the Invidia... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.