lossol Posted August 30, 2013 Author Share Posted August 30, 2013 Gauges are back in stock VBG1 gauges available at www.gtboostgauge.com Link to comment Share on other sites More sharing options...
cheeseenlo Posted September 3, 2013 Share Posted September 3, 2013 Lossol, you've got a PM. Link to comment Share on other sites More sharing options...
Strizzy Posted October 1, 2013 Share Posted October 1, 2013 Any updates as to when we'd be able to use both channels on the aux board? I'd like to get my fuel pressure to display on the gauge. My bad luck build Link to comment Share on other sites More sharing options...
gordata Posted February 25, 2014 Share Posted February 25, 2014 lossol- When the gauges going to be back in stock. looking at picking one up for my 2008 Legacy Spec B. Link to comment Share on other sites More sharing options...
discojon Posted March 5, 2014 Share Posted March 5, 2014 I just want to say how much I love my VBG-1. It is honestly one of if not my favorite thing about the car. The exterior and interior of my car are 100% oem down to wheels and tires and mufflers, but it is a stage 4 build so subtlety is key. The VBG-1 is a perfect fit that blends in almost unnoticed. I have had many complements on it so far. Thank you for such an innovative and awesome product. Link to comment Share on other sites More sharing options...
I Donated thefultonhow Posted March 5, 2014 I Donated Share Posted March 5, 2014 I just want to say how much I love my VBG-1. It is honestly one of if not my favorite thing about the car. The exterior and interior of my car are 100% oem down to wheels and tires and mufflers, but it is a stage 4 build so subtlety is key. The VBG-1 is a perfect fit that blends in almost unnoticed. I have had many complements on it so far. Thank you for such an innovative and awesome product. Probably my favorite mod too. Link to comment Share on other sites More sharing options...
BoozeRS05 Posted March 10, 2014 Share Posted March 10, 2014 Man I've dug around the thread a good bit, but I can't find the definitive install post. I've got the screen installed in the vent and everything is hanging loose near the fuse panel, but I'd like to see the rest of the install before I go further. Anyone have a thread going or direct me to a install post? EB's Subaru journal - 2005 LegacyGT Wagon & 2014 Forester FB25 (2008 specB - RIP) IG@legacygtliving Link to comment Share on other sites More sharing options...
PtPixel Posted March 10, 2014 Share Posted March 10, 2014 Man I've dug around the thread a good bit, but I can't find the definitive install post. I've got the screen installed in the vent and everything is hanging loose near the fuse panel, but I'd like to see the rest of the install before I go further. Anyone have a thread going or direct me to a install post? Post #1292 was my install, very straight forward. What do you need to know? Just find a place to ziptie the sender box and attach the power to the fuse. Link to comment Share on other sites More sharing options...
chimera Posted March 10, 2014 Share Posted March 10, 2014 There's a rubber bung about 1.5" in diameter in the firewall behind the intercooler (I think only on the auto/tiptronic's) that you can use to pass the hosing through and into the cabin. A damn site easier than through the wheel arch! Link to comment Share on other sites More sharing options...
BoozeRS05 Posted March 10, 2014 Share Posted March 10, 2014 (edited) ^ That's what I need to know, except something other than a RHD LGT with a 5mt preferably  Basically what's the best way to run the boost vacuum line? Edited March 10, 2014 by BoozeRS05 EB's Subaru journal - 2005 LegacyGT Wagon & 2014 Forester FB25 (2008 specB - RIP) IG@legacygtliving Link to comment Share on other sites More sharing options...
chimera Posted March 10, 2014 Share Posted March 10, 2014 ^ That's what I need to know, except something other than a RHD LGT preferably Got a mirror? Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted March 11, 2014 Moderators Share Posted March 11, 2014 I routed my vacuum line through the wheel arch, was pretty easy. "Bullet-proof" your OEM TMIC! <<Buy your kit here>>Â Not currently in stock Link to comment Share on other sites More sharing options...
PtPixel Posted March 11, 2014 Share Posted March 11, 2014 ^ agreed. It's the exact same for LHD/RHD. Punch through the grommet that passes from wheel arch to drivers-side cabin. Very easy. Link to comment Share on other sites More sharing options...
BoozeRS05 Posted March 11, 2014 Share Posted March 11, 2014 I figured it would be different RH to LH, just wanted to see the pics before I started pulling the wheel liner. Loving it mounted even though its not on, looks great already. EB's Subaru journal - 2005 LegacyGT Wagon & 2014 Forester FB25 (2008 specB - RIP) IG@legacygtliving Link to comment Share on other sites More sharing options...
Daniels Posted March 11, 2014 Share Posted March 11, 2014 I ran mine through the driver side fender well Link to comment Share on other sites More sharing options...
BoozeRS05 Posted March 11, 2014 Share Posted March 11, 2014 Success! That wasn't hard at all. Idk wtf took me so long… EB's Subaru journal - 2005 LegacyGT Wagon & 2014 Forester FB25 (2008 specB - RIP) IG@legacygtliving Link to comment Share on other sites More sharing options...
BoozeRS05 Posted March 12, 2014 Share Posted March 12, 2014 Awesome addition to my wagon, definitely getting it setup for oil pressure too. EB's Subaru journal - 2005 LegacyGT Wagon & 2014 Forester FB25 (2008 specB - RIP) IG@legacygtliving Link to comment Share on other sites More sharing options...
I Donated thefultonhow Posted March 12, 2014 I Donated Share Posted March 12, 2014 Awesome addition to my wagon, definitely getting it setup for oil pressure too. Oil pressure is a harder install. Still worth it, though. Link to comment Share on other sites More sharing options...
BoozeRS05 Posted March 12, 2014 Share Posted March 12, 2014 Â Is there an install thread on it, or something close enough to get the idea? EB's Subaru journal - 2005 LegacyGT Wagon & 2014 Forester FB25 (2008 specB - RIP) IG@legacygtliving Link to comment Share on other sites More sharing options...
I Donated thefultonhow Posted March 12, 2014 I Donated Share Posted March 12, 2014 http://legacygt.com/forums/showthread.php/oil-pressure-gauge-install-empty-oil-galley-24956.html?t=24956&highlight=oil+galley+plug Link to comment Share on other sites More sharing options...
gordata Posted March 13, 2014 Share Posted March 13, 2014 When will more be in stock for 4th gen LHD Legacy? Link to comment Share on other sites More sharing options...
istealfrombums Posted April 16, 2014 Share Posted April 16, 2014 Bump, waiting for these to come back in stock Link to comment Share on other sites More sharing options...
ERLoft Posted April 16, 2014 Share Posted April 16, 2014 From what I've read, these only take 1 extra sensor input, right? I wish it were two - I'd love to have just this with boost, oil temp & pressure and a V3 AP as the only items in the car... 2013 â–ˆS4 - Glacier White - DSG - B&O - Tech Package - Sports Diff - Napa - RS4 Grille - Stasis Exhaust - APR Intake - KW Variant 1 - Stern Control Arms - CR-15 - Stasis RSB - Moog Endlinks - PC Hyper Black Peelers - Deval Front Lip - ECS Rear Diffuser - Carbon Imports Ducktail - ECS Mirror Caps - Relak Paddle Extensions - Autostyle Floor Mats - LED Interior - V1 - Blackvue DR900s - Â [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
I Donated thefultonhow Posted April 16, 2014 I Donated Share Posted April 16, 2014 From what I've read, these only take 1 extra sensor input, right? I wish it were two - I'd love to have just this with boost, oil temp & pressure and a V3 AP as the only items in the car... They will take two soon, with a firmware update. I don't think oil temp is one of the options, though. Link to comment Share on other sites More sharing options...
discojon Posted April 18, 2014 Share Posted April 18, 2014 Just wanted to reiterate that I love my VBG-1. Sometimes it will beep like I am holding a finger on the top capacitive button and the buttons will freeze for a minute or so then go back to normal? Anyone else seeing that behavior? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now