jakegoedicke Posted April 6, 2016 Share Posted April 6, 2016 so recently i replaced my turbo everything went well and i replaced all needed parts and changed my oil, then my car started idling very low and going into limp mode. That was the wheel speed sensor. i got that all figured out but on my way to work today my CEL came on. i read the code with my AP and got p0020 cam shaft position timing over advanced bank 1. What could it be??? my car is running normal. no idle or stalling issues. oil checks out clean and full. Link to comment Share on other sites More sharing options...
jakegoedicke Posted April 6, 2016 Author Share Posted April 6, 2016 i would also like to know if this is harmfull to drive with. Link to comment Share on other sites More sharing options...
apexi Posted April 7, 2016 Share Posted April 7, 2016 Long thread on p0021, which is what I think you might mean. Chances are the driver side oil control valve is no good. I'm not comfortable saying whether or not it's harmful to drive on, but I think p0011 for the passenger side is more worrisome. http://legacygt.com/forums/showthread.php/help-p0021-intake-camshaft-position-timing-over-advanced-18887.html Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.