Jump to content
LegacyGT.com

Legacy Part Numbers.


Recommended Posts

There's actually two ahead of the turbo:

P/N: 22641AA32A (Front O2 Sensor) - Manifold

P/N: 22629AA012 (Center O2 Sensor) - UpPipe

 

And 1 after the turbo (with different P/Ns for MT or AT)

P/N: 22690AA69A (Rear O2 Sensor) - Rear Cat (Manual Trans)

P/N: 22690AA70A (Rear O2 Sensor) - Rear Cat (Auto Trans)

 

 

What would be the part numbers for the JDM model?

Link to comment
Share on other sites

  • Replies 329
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Here are the Part Numbers For the JDM:

 

P/N: 22461AA390 (Center O2 Sensor) - UpPipe

P/N: 22690AA690 (Rear O2 Sensor) - Rear Cat (Manual Trans)

 

Dont have info on the manifold one, nor the auto trans rear.

22641AA390_Front_03.thumb.jpg.2f8fa5639e0501fc9ab41658980f1241.jpg

22690AA690_Rear_03.thumb.jpg.3d817617c349e5a0f12f69fc2565e54f.jpg

Edited by ScoobieTT
Link to comment
Share on other sites

Part number or specs for:

 

-Nuts on turbo-downpipe studs

-Downpipe-transmission hanger bolt

 

I lost both, so I could use part numbers or just specs to go buy them at the hardware store. Thanks.

MODS: PW TMIC, Cobb catted DP, HKS cat-back, AVO filter, Bren e-tune; Konis/Epics, Advan RCII
Link to comment
Share on other sites

  • 2 weeks later...
bump AGAIN.

 

Rear Upper Differential Bushings:

 

 

R160

R180

According to OpposedForces, they're the same. Even the rear sub-frame appears to the same:

 

 

R160

R180

- Pro amore Dei et patriam et populum -
Link to comment
Share on other sites

  • 2 months later...

I have acquired the 05-07 - JDM Legacy (Sedan) rear tail lights, however it didn't come with the fog light socket unit where the bulb plugs into. So was wondering if there's a special part # for this or if you know what i could use in its place?

 

thanks

Link to comment
Share on other sites

  • 4 weeks later...
  • 1 month later...
I believe JDM Rev.A cars (MY2004) also have exclusively R160, yet they come with the alu diff support.

 

Looking to install the aluminum diff support with my new suretrac R160... this is as close to confirmation as I can find that it will fit. Any other news?

 

For reference:

 

Aluminum Differential Member - 41310AG040

 

Steel Differential Member - 41310AG02B

Link to comment
Share on other sites

  • 6 months later...

Great diagram! Actually it looks like C is pointing to the compressor cover outlet. I need the coolant line that sticks straight up off the side which looks like B in this picture?

 

Looking at the site that that hosted the picture you posted, I'm concerned that coolant line might be sold as part of the turbo assembly since it doesn't have a p/n?

coolant-line.JPG.6b57dee44e26258f8ffe82af593ca343.JPG

Edited by Boost_addict
Link to comment
Share on other sites

  • 6 months later...
Could you please help me finding banjo filter replacement for LGT 2003 JDM 2.0 turbo? I found 15194AA110 on first page but is it same for JDM ? can I buy only filter without bolt somewhere? Just not to pay 20$ in just a plastic filter that is 1$ worth.
Link to comment
Share on other sites

  • 2 weeks later...
  • 3 weeks later...

How about this guy:

 

http://i44.tinypic.com/zwanbt.jpg

The hose on the right with the split and my attempt at keeping it from getting worse - zip tied :)

 

Another reference pic:

http://i42.tinypic.com/25hoarb.jpg

 

Thanks for all your guys' help!

Link to comment
Share on other sites

My FAST2 catalog shows 99071AC230 for my '06 LGT (build date 06/06), along with several other '05 and '06 VINs I have on record. Not sure why the conflict with Opposed Forces, as 99071AC020 also shows up in the reverse lookup for '05/'06 MY LGTs. They are both active part numbers; 99071AC020 retails for $28.46, while 99071AC230 retails for $11.08.

 

My guess is that the *230 was a number assigned to the same hose but from a different manufacturer. I have seen this before, where early MY part numbers are different but physically identical to later MY part numbers, and the early stuff is always way more expensive. The OEM alternator is an example from my recent memory, with the '05 being ~2x the cost of the '06+ part, yet having the same mechanical and electrical specs.

Link to comment
Share on other sites

  • 2 months later...

I have tried searching in the various related threads, but cannot find a part number for the front lower control arm Front bushing (2005 LGT).

I would like to replace the front bushings with uprated OEM parts, and I believe that the 2008 WRX, WRX-STi and Spec B might use the same part?

I will be replacing the Rear bushings with Group N PN ST20204ZR010.

For my use, I don't feel I need Group N replacement for the front bushing.

Could someone help me find this Front bushing PN?

 

My searching on OpposedForces seemed to indicate PN 20204AG030 and I ordered a pair, but it was hard to determine definite model years.

I found the following info which gives the relative numbers:

 

STI Group N front arm rear bushings - ST20204ZR010

STI Group N front arm front bushings - ST20204ZR000

 

08-10 Impreza/Spec.B front arm rear bushings - 20204AG011

08-10 Impreza/Spec.B front arm front bushings - 20204AG030

Edited by HarryD
Information found on alternate search.
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...

Important Information

Terms of Use