Satans_Puppet Posted September 13, 2007 Share Posted September 13, 2007 I took my endlinks off today (perrin) and noticed that one was really loose and easily turned and the other was stiff. I don't remember if they were stiff or loose from the package. Link to comment Share on other sites More sharing options...
LibertyGT Posted September 13, 2007 Share Posted September 13, 2007 They should be firm when new. They will loosen somewhat as they age. I just put my OEMs back in after wearing out 2 x sets of Whitelines. Tim Link to comment Share on other sites More sharing options...
KartRacerBoy Posted September 14, 2007 Share Posted September 14, 2007 Did the Whitelines have the "seal" over the bearing/bushing? Link to comment Share on other sites More sharing options...
jaspert Posted September 17, 2007 Share Posted September 17, 2007 Did the Whitelines have the "seal" over the bearing/bushing? Yeah but pretty useless or the quality control is subpar. Mine was a gone case after 3-4 months. Link to comment Share on other sites More sharing options...
LibertyGT Posted September 18, 2007 Share Posted September 18, 2007 Jaspert and I have both had these issues and yes mine had the dust covers over them but they really don't do a lot. Whiteline offered to replace again no questions asked but they could not tell me why they were rattling so soon. I could not be bothered, the OEMs are in and working so far. Next trick is to install grease nipples on the 4 x D shackles (front and rear) so I can get some grease into the poly bushes without having to remove them. Tim Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.