enkeiandmore Posted January 23, 2009 Share Posted January 23, 2009 so the other day my friends tell me that my brake light on the right is out so i went ahead and replaced both sides and it works fine. but today my dad tells me that my left side is out now and when i went to go see if anything was loose and jiggled the wiring it turned on for a few seconds and went back out. any ideas or suggestions would be great. Link to comment Share on other sites More sharing options...
Yamarocket630 Posted January 24, 2009 Share Posted January 24, 2009 Are you sure you replaced the brake light bulbs and not the signal bulbs? Link to comment Share on other sites More sharing options...
han Posted January 24, 2009 Share Posted January 24, 2009 Make sure the bulb is completely in the socket? My friend's 02 WRX had a few bulbs out on his rear end, his right/outer brake light and taillight, and his left outer brake light. I took out the socket, and the bulbs were barely in the socket. Pushed the bulbs in completely and they all work normal. Link to comment Share on other sites More sharing options...
enkeiandmore Posted January 25, 2009 Author Share Posted January 25, 2009 checked both suggestions and its still a no go. so its time to go to the dealership and use this warranty Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.