Mgozz Posted January 4, 2013 Share Posted January 4, 2013 According to http://opposedforces.com/ they are different part numbers. My Outback XT has a stock LGT sedan suspension in it and it is pretty low. Too low for my taste. See here: http://i.imgur.com/NDlGm.jpg So my question. Would it be worth it to find/install a wagon suspension? Will the different springs lift it up a bit? Thanks. Link to comment Share on other sites More sharing options...
Legacy06 Posted January 4, 2013 Share Posted January 4, 2013 Wagon springs will lift the rear up slightly. I have a full set of wagon springs available and I'm kinda close to you in Maine for the next few days if interested. Link to comment Share on other sites More sharing options...
racso_dor Posted January 4, 2013 Share Posted January 4, 2013 sits just right in my eyes Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted January 4, 2013 Moderators Share Posted January 4, 2013 Saggy butt. You could install some spacers in the rear as well--they sit between the top hats and the frame. "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
Mgozz Posted January 4, 2013 Author Share Posted January 4, 2013 Wagon springs will lift the rear up slightly. I have a full set of wagon springs available and I'm kinda close to you in Maine for the next few days if interested. Cool I'll pm you. sits just right in my eyes Yeah. It's not bad looking but I feel like the ride is a little rough and could be improved. Saggy butt. You could install some spacers in the rear as well--they sit between the top hats and the frame. I though about that and looked at the paranoid fabrications parts. I'd like to go with springs that are a bit higher first and if I don't like it I'll go with the spacers. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.