Donnyku Posted March 4, 2013 Share Posted March 4, 2013 So today I decided to take a look at my fluids in my 95 Legacy L Wagon, something I like to do weekly/biweekly on my cars, and after finally learning where the dipstick was for the transmission fluid, I went to pull it out. Issue being it is so tight in there I can't pull it out. Any tips or ideas on what to do would be appreciated. Link to comment Share on other sites More sharing options...
Osei Posted March 4, 2013 Share Posted March 4, 2013 Pair of pliers. Twist it to break the seal, then you'll be able to remove it.Clean the yellow portion and oil the o ring before you reinstall. O. Link to comment Share on other sites More sharing options...
Donnyku Posted March 4, 2013 Author Share Posted March 4, 2013 Thanks, I'll try that tomorrow after work when it's light out Link to comment Share on other sites More sharing options...
Donnyku Posted March 5, 2013 Author Share Posted March 5, 2013 alright that worked well, thanks again. Fluid was all good Link to comment Share on other sites More sharing options...
Osei Posted March 5, 2013 Share Posted March 5, 2013 All's well that ends well. O. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.