methoddan Posted March 7, 2010 Share Posted March 7, 2010 I have searched the forums/manuals and still cannot find a way to change the Multi-information display (Vehicle with SI-DRIVE) clock to display in 12 hour format vs the 24 hour format it is currently displaying. I did set the Navigation clock format to 12 hour, but that did not help. Setting the clock/date via /Set - Meter Setting did not make a difference. Any help is appreciated. Link to comment Share on other sites More sharing options...
Windy Road Posted March 7, 2010 Share Posted March 7, 2010 It only displays in 24h which is beat. Though I usually have some fuel gauge in the cluster on and the clock on the nav screen and set to map, its not a big deal to me. 276hp/347tq On a DynoJet Dyno Video - Had a big lean spot as you can tell in the second pull Link to comment Share on other sites More sharing options...
methoddan Posted March 7, 2010 Author Share Posted March 7, 2010 Well, thanks for the feedback. I guess after 1 pm, I stick with the Navi clock. Link to comment Share on other sites More sharing options...
ehsnils Posted March 7, 2010 Share Posted March 7, 2010 I would prefer if the clock was in 24 hour format instead of that AM/PM stuff... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.