haycock Posted November 17, 2012 Share Posted November 17, 2012 I'm going to be doing some logging and want to hook up my wide band to the laptop. I bought a plx wb and got the cable to go from the module to laptop so if i plug it in to the laptop will ecuflash automatically read it? I'v searched with no answers. Thanks, Bryan Link to comment Share on other sites More sharing options...
bnguyenbb6 Posted November 18, 2012 Share Posted November 18, 2012 Use Ecuflsh for writing to the ecu. Use RomRaider for logging. There is a plug in for plx I believe. Link to comment Share on other sites More sharing options...
joeleodee Posted November 18, 2012 Share Posted November 18, 2012 Yes, what he said. Moving forward, once romraider is reading data, you will have to click on plugins and select your respective wideband sensor and switch the com port to which one on your laptop you have it plugged in to. Then go to the 'external sensors' tab and check the box that corresponds to your sensor. After that, it should read. Check this thread for reference to your wideband. http://www.romraider.com/forum/viewtopic.php?f=7&t=4299&sid=731f70c26cc38acf323e429fa472e55c Link to comment Share on other sites More sharing options...
haycock Posted November 18, 2012 Author Share Posted November 18, 2012 Thanks for the replies. I think i got it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.