Jump to content
LegacyGT.com

lgt brake size problem


Recommended Posts

To make a long story short i went through a buddy of mine who gets parts cheap and picked up some front rotors and pads. I make sure there for the gt and they say their the biggest they got. Ok sweet get home put them on and no dice, not even close. The ones the gave me measure 11 5/16" and mine are 12 1/2". So for s&g's i mount the rotor load the pads and the pad sits about 1/2" off the back of the rotor. Any ideas? Subaru has no other listing for rotors in there system. The thing that gets me is the pads are the right size that means the whole hub assembly is different. Is my car some kinda factory defect? Oh and i checked STi rotors are bigger.:spin::spin::spin::spin:
Link to comment
Share on other sites

05 LGT front rotors are 30mm x 316mm (1.18in x 12.44in).

 

05 2.5i-limited rotors 24mm x 294mm (0.94in x 11.57in).

 

You simply got the wrong rotors. Note they are thinner too, probably thinner vent area.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

Terms of Use