Jump to content
LegacyGT.com

BrenTuning: 5th Gen Legacy GT Stage Progression


BrenTuning

Recommended Posts

Hey everyone,

 

There's not a whole lot of information out there on the 5th generation Legacy GT, after tuning many of these we wanted to share what these cars can do with the factory turbo.

 

First we have an all stock example. We baselined it both with the OEM map and Cobb's Stage1. Then we went to work and added our ProTune.

 

http://www.brentuning.com/dyno/graph.php?gb=0&hp=1&torque=1&afr=1&rpm=1&sl=1&sln=1&sat=0&cb=0&dgr=1&smm=0&sg=1&runid1=533&rgb1=000000255&runid2=534&rgb2=204000000&runid3=535&rgb3=000153000

 

Up next we had a "Stage2" car come in. Which consisted of a Invidia turbo back exhaust and a RacerX chargepipe.

 

http://www.brentuning.com/dyno/graph.php?gb=0&hp=1&torque=1&afr=1&rpm=1&sl=1&sln=1&sat=0&cb=0&dgr=1&smm=0&sg=1&runid1=522&rgb1=000000255&runid2=534&rgb2=204000000&runid3=535&rgb3=000153000

 

And finally, we have the fully bolted combination. This car had an Invidia turbo back exhaust and RacerX TMIC.

 

Let it be noted that this car was done on the DynaPack's we used to rent compared to our Mustang dyno that the first two cars were done on. So peak numbers are higher on this one. But the important part is still here, the delta.

 

http://www.brentuning.com/dyno/graph.php?gb=0&hp=1&torque=1&afr=1&rpm=1&sl=1&sln=1&sat=0&cb=0&dgr=1&smm=0&sg=1&runid1=337&rgb1=000000255&runid2=338&rgb2=204000000

 

 

Contact us today to setup your tuning appointment. We offer E-Tuning, Road Tuning, and Dyno Tuning. As well as part installs!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

Terms of Use