westu37 Posted March 15, 2012 Share Posted March 15, 2012 Hey all, Got around to taking some pics recently. No major mods so far. -vf52 installed when I bought it -phatbotti tuned after turbo install -custom up-pipe cat delete(welded 2.75'' pipe in place of the cat) -cat back magnaflow exhaust Just got the whiteline rear adjustable sway bar; will install shortly.. ordered the bilstein hd set-up, got spec b springs and all hardware $1000 dollars later..... found a set of asa wheels on CL and painted the centers gold.... Link to comment Share on other sites More sharing options...
OutbackXT05 Posted March 15, 2012 Share Posted March 15, 2012 Gonna look nice once its lowered on those wheels. Link to comment Share on other sites More sharing options...
dryvby Posted March 16, 2012 Share Posted March 16, 2012 Lookin good. Link to comment Share on other sites More sharing options...
Sublimejoe Posted March 16, 2012 Share Posted March 16, 2012 Nice! Looking forward to seeing more photos! Link to comment Share on other sites More sharing options...
dryvby Posted March 17, 2012 Share Posted March 17, 2012 Definitely replace the rear sway bar. Very noticeable improvement to the attitude of the car. Link to comment Share on other sites More sharing options...
LosAngelesLGT Posted March 17, 2012 Share Posted March 17, 2012 My wifes XT rails though turns with F&R sways. Had a lot of fun in the rain this morning Link to comment Share on other sites More sharing options...
westu37 Posted March 18, 2012 Author Share Posted March 18, 2012 got the rear sway bar on Friday... Haven't been able to get on one of our "back" roads yet, but around town aready notice a more compliant rear end, especially out of the sloped driveway... Wheels have all the rubber mounted for now...225/40r18's The tires are small for my taste, but free is for me right now, especially with 7/32" of tread left.... Hard not to put the wheels on, but they just won't look right until the struts go on..... Link to comment Share on other sites More sharing options...
westu37 Posted March 22, 2012 Author Share Posted March 22, 2012 som more pics. trying out the Vita's camera.... Link to comment Share on other sites More sharing options...
westu37 Posted March 22, 2012 Author Share Posted March 22, 2012 also some other pics of the 245/50r17 tires... Link to comment Share on other sites More sharing options...
westu37 Posted March 22, 2012 Author Share Posted March 22, 2012 sway-bar=:D:D Link to comment Share on other sites More sharing options...
LosAngelesLGT Posted March 22, 2012 Share Posted March 22, 2012 I hate the fitment of the magnaflows without mods. I pretty much hate all pure LGT fitment catbacks on OBXT with USDM rear bumpers. Really needs cutouts. What do you think of our magnaflow setup? http://legacygt.com/forums/showthread.php/introducing-mrs-lalgts-intamous-tuned-5mt-obxt-180191.html Link to comment Share on other sites More sharing options...
Sublimejoe Posted March 23, 2012 Share Posted March 23, 2012 Look into Nameless Performance: http://farm7.staticflickr.com/6067/6113180712_3c23372921_b.jpg http://farm8.staticflickr.com/7065/7005771843_50c0798abd_c.jpg [ame=http://www.youtube.com/watch?v=WC2uBmWtJtQ]2006 Subaru Outback XT Nameless Performance AxleBack - YouTube[/ame] Link to comment Share on other sites More sharing options...
westu37 Posted March 23, 2012 Author Share Posted March 23, 2012 anyone selling a jdm rear bumper? That'll solve my hanging issue... Link to comment Share on other sites More sharing options...
westu37 Posted March 23, 2012 Author Share Posted March 23, 2012 another whole week to wait for 'steins to show up..... Link to comment Share on other sites More sharing options...
westu37 Posted April 16, 2012 Author Share Posted April 16, 2012 ok, so apparently there is no right side hd's in the united states.... I have to wait for Bilstein to make one before Beans delivers the struts... Link to comment Share on other sites More sharing options...
westu37 Posted May 4, 2012 Author Share Posted May 4, 2012 :dm::dm::dm:struts are in!!!!!!!:dm::dm::dm: picks up in about 2 hrs from now...... Link to comment Share on other sites More sharing options...
westu37 Posted May 5, 2012 Author Share Posted May 5, 2012 heres the picks Link to comment Share on other sites More sharing options...
westu37 Posted May 14, 2012 Author Share Posted May 14, 2012 Some more Pictures: Link to comment Share on other sites More sharing options...
LosAngelesLGT Posted May 14, 2012 Share Posted May 14, 2012 You're sexy and you know it! Link to comment Share on other sites More sharing options...
westu37 Posted May 15, 2012 Author Share Posted May 15, 2012 had to put Teins in the front to get the nice stance, otherwise I have the 1/2" spacer in the rear with stock spec-b springs. I'll drive it like this for a while untill I want more handling, but damn, what a difference! Link to comment Share on other sites More sharing options...
Impatient Posted May 16, 2012 Share Posted May 16, 2012 Bilstein HD's, right? Whiteline rear sway, right? tein H???or S??? in front? Spec B springs in rear? USDM Spec B sedan??? spacers? where, how thick? Did you have the Spec B front spings mounted at some point? If so, what was the height difference beteween those (in front) and the stock OBXT stuff? And is there an offset difference between your 18" wheels and the stock 17's? Ride quality? Are (were) the spec B springs too soft? Link to comment Share on other sites More sharing options...
westu37 Posted May 20, 2012 Author Share Posted May 20, 2012 Impatient, Yes Bilstein HD's Teins were purchased used from Craigslist, could not find any markings to designate if they were s or h Stock spec b in the rear with 1/2 inch spacers from rallitec, i think (also got the longer studs for the top-hats) The first darker pictures in post #17 is with the stock spec-b springs. The offset for the 18's are 38 i believe, but I'll double check. They are ASA ar1's afaik. the spokes were originally black, I sprayed them gold Wes Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.