Corny357 Posted October 22, 2011 Share Posted October 22, 2011 I adjusted my low beams today as per our sticky up top on how to properly align your headlights, but noticed that when the low beams were in proper adjustment/alignment/whatever, the passenger's side high beam was quite a bit lower than the driver's side. I cranked the passenger's side adjustment knob way up just to see what would happen, and of course, the high beams were properly aligned then, but the low beams were obviously way off. I have it set back so that the low beams are proper for now, but I'm not sure what to do about the high beam now... Brandon Link to comment Share on other sites More sharing options...
Corny357 Posted October 27, 2011 Author Share Posted October 27, 2011 Really? Nobody? Link to comment Share on other sites More sharing options...
mk6933 Posted October 27, 2011 Share Posted October 27, 2011 I wasn't aware that there was a high beam adjustment. Check your bulbs to see if they lock in properly. Sometimes thats the cause of the misalignment. Link to comment Share on other sites More sharing options...
Corny357 Posted October 27, 2011 Author Share Posted October 27, 2011 There is no separate high beam adjustment, which is why I was perplexed. Oddly enough, I just went out a second ago and literally switched the left bulb to the right and the right bulb to the left and they are even/aligned now. :confused: Link to comment Share on other sites More sharing options...
mk6933 Posted October 27, 2011 Share Posted October 27, 2011 I guess you didn't turn and lock it correctly. It happened to me before. Link to comment Share on other sites More sharing options...
Corny357 Posted October 27, 2011 Author Share Posted October 27, 2011 Well, no, because before I switched them, I re-seated them in there and they were in there properly turned and locked. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.