Max Capacity Posted June 30, 2009 Share Posted June 30, 2009 I just did it this morning...one negative thing I noticed-as I am sure others have-cannot keep my foot off the gas! I have already lost .3 on the MPG. Sounds great for me. I do have the Cobb catted DP too. Great modd-and mine was free! I have noticed the same affect. Dash is saying 20.1 mpg for the past 60 miles. Damn it sounds to good. mendozer, do both sides. Balance of the exhaust signal. May be it doesn't matter with a Y pipe, but balance is key in a lot of things. 305,600miles 5/2012 ej257 short block, 8/2011 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. (SOLD). CHECK your oil, these cars use it. Engine Build - Click Here Link to comment Share on other sites More sharing options...
Noeladams Posted July 1, 2009 Share Posted July 1, 2009 here goes mine Rear of the Car. [ame=http://www.youtube.com/watch?v=RUGvnCeiKmI]YouTube - 2005 Legacy GT with Hogzaust sound[/ame] Windows Up: [ame=http://www.youtube.com/watch?v=7ops4WCgRm8]YouTube - Legacy GT Hogzaust Windows Up[/ame] Windows Down: [ame=http://www.youtube.com/watch?v=-oLk57oCiuQ]YouTube - Legacy GT Hogzaust Windows Down[/ame] Link to comment Share on other sites More sharing options...
Max Capacity Posted July 1, 2009 Share Posted July 1, 2009 (edited) Here's mine. Two thick washers on all 4 bolts, for a 1/4" gap. I may add a 3rd washer this weekend. DSCN3575.flv video by 92Si - Photobucket@@AMEPARAM@@http://vid185.photobucket.com/player.swf?file=http://vid185.photobucket.com/albums/x40/92Si/DSCN3575.flv@@AMEPARAM@@vid185@@AMEPARAM@@185@@AMEPARAM@@x40/92Si/DSCN3575 Edited July 1, 2009 by Max Capacity 305,600miles 5/2012 ej257 short block, 8/2011 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. (SOLD). CHECK your oil, these cars use it. Engine Build - Click Here Link to comment Share on other sites More sharing options...
hogmeat Posted July 2, 2009 Author Share Posted July 2, 2009 Spread the word, converts! To the guy with the 3 vids - the automatic sounds pretty good! I think I still like manual better, but still not bad! I'm pleasantly surprised... It was most certainly worth the couple bucks and 10 mins of my time. CLICK HERE FOR THE HOGZAUST Link to comment Share on other sites More sharing options...
Noeladams Posted July 2, 2009 Share Posted July 2, 2009 Spread the word, converts! To the guy with the 3 vids - the automatic sounds pretty good! I think I still like manual better, but still not bad! Thanks, actually does pretty good.... I wanted a stick but at the time all i could find in the price range was a auto..... It's okay and at least the wife can drive it lol. I hope to take it to the track at least once but I've been told not to do it all the time. Link to comment Share on other sites More sharing options...
MikeAldea Posted July 2, 2009 Share Posted July 2, 2009 here goes mine Rear of the Car. Windows Up: Windows Down: Noeladams, I like your vids. How many washers per bolt did you do? Link to comment Share on other sites More sharing options...
Noeladams Posted July 2, 2009 Share Posted July 2, 2009 Noeladams, I like your vids. How many washers per bolt did you do? 2 per bolt Link to comment Share on other sites More sharing options...
airmike Posted July 6, 2009 Share Posted July 6, 2009 Tempting, Tempting, Tempting.... Link to comment Share on other sites More sharing options...
hogmeat Posted July 6, 2009 Author Share Posted July 6, 2009 Just do it. What do you have to lose? 20 minutes and 48 cents? Do it. I'm pleasantly surprised... It was most certainly worth the couple bucks and 10 mins of my time. CLICK HERE FOR THE HOGZAUST Link to comment Share on other sites More sharing options...
Catalyst Posted July 6, 2009 Share Posted July 6, 2009 And a an hour or so cleaning all the black sout out from under the car. "This is an adventure." Link to comment Share on other sites More sharing options...
hogmeat Posted July 6, 2009 Author Share Posted July 6, 2009 yah, OK. Ask anyone with the mod how much soot they have. I ran catless for 2 years and never had a trace of soot, other than what is typical on the exhaust tips. I guess, if you are buring oil or have a HG leak, you could get a little sooty, but then the soot is the least of your worries! I'm pleasantly surprised... It was most certainly worth the couple bucks and 10 mins of my time. CLICK HERE FOR THE HOGZAUST Link to comment Share on other sites More sharing options...
d_a_b Posted July 13, 2009 Share Posted July 13, 2009 just hogzausted my 05 lgt... add another satisfied customer to the list Link to comment Share on other sites More sharing options...
fishbone Posted July 14, 2009 Share Posted July 14, 2009 hogmeat, know that at least one hogzawst equipped vehicle has participated in the Guinness World Record Subaru meet at Itasca, IL. And I gotta say, it sounded damn nice even compared to aftermarket exhausts. People were paying attention Link to comment Share on other sites More sharing options...
hogmeat Posted July 14, 2009 Author Share Posted July 14, 2009 In a couple years, I'm going to get my Subaru back. Just...need...money... I'm pleasantly surprised... It was most certainly worth the couple bucks and 10 mins of my time. CLICK HERE FOR THE HOGZAUST Link to comment Share on other sites More sharing options...
airmike Posted July 14, 2009 Share Posted July 14, 2009 Hey Hog, I just noticed your in Iowa as welll!! If I buy the parts would you be willing to help put the mod on? I think it would be badass to say I got my Hog-zawst from the man himself!! Link to comment Share on other sites More sharing options...
Max Capacity Posted July 14, 2009 Share Posted July 14, 2009 Has anybody had any problems driving the car like this in the Winter, snow and salt on the roads ? Can you see any problems ? I have about a 5/8" gap. Do most of my driving during the Winter. 305,600miles 5/2012 ej257 short block, 8/2011 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. (SOLD). CHECK your oil, these cars use it. Engine Build - Click Here Link to comment Share on other sites More sharing options...
hogmeat Posted July 15, 2009 Author Share Posted July 15, 2009 Hey Hog, I just noticed your in Iowa as welll!! If I buy the parts would you be willing to help put the mod on? I think it would be badass to say I got my Hog-zawst from the man himself!! Sure! Next time you plan to be in the Marshalltown area, send me a PM! If they are stuck on, we'll fire up the impact wrench, and zip them right off. CR isn't that far away. Hell, I might come over myself if you'll take me to HuHot to stuff my face afterwards. Rock on! I'm pleasantly surprised... It was most certainly worth the couple bucks and 10 mins of my time. CLICK HERE FOR THE HOGZAUST Link to comment Share on other sites More sharing options...
hogmeat Posted July 15, 2009 Author Share Posted July 15, 2009 Has anybody had any problems driving the car like this in the Winter, snow and salt on the roads ? Can you see any problems ? I have about a 5/8" gap. Do most of my driving during the Winter. Been in the thread several times...the worst that will happen is the flanges could scale - but not really at any rate that would make them wear out faster than your mufflers already would... I drove 3 winters like that, and no problems! I'm pleasantly surprised... It was most certainly worth the couple bucks and 10 mins of my time. CLICK HERE FOR THE HOGZAUST Link to comment Share on other sites More sharing options...
Max Capacity Posted July 15, 2009 Share Posted July 15, 2009 ^ Thanks, I stopped by my local machine shop. The guy's were impressed with the way the car sounded. 305,600miles 5/2012 ej257 short block, 8/2011 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. (SOLD). CHECK your oil, these cars use it. Engine Build - Click Here Link to comment Share on other sites More sharing options...
RJS5689 Posted July 19, 2009 Share Posted July 19, 2009 Is it alright to use the Hogzaust mod with an Accessport Stage 1 flash? Has anybody had any problems driving the car like this in the Winter, snow and salt on the roads ? Can you see any problems ? I have about a 5/8" gap. Do most of my driving during the Winter. No problems at all and I use my vehicle through Maine Winters. Link to comment Share on other sites More sharing options...
jimlatro Posted July 19, 2009 Share Posted July 19, 2009 Now - I can't discuss exactly who makes this as I'm under a form of an "NDA". You all know what happened last time I let something slip without thinking it was any big deal...Bosal was pissed. :oops: This is a bolt-on exhaust, keeps stock hanger locations, and even keeps the stock tips! This is what makes it so inexpensive!! Makes it completely stock looking, but unleashes a ton of that boxer rumble at idle, and turns into a tame roar when you floor it. A few backfires and pops always accompany it. I won't release the price of this yet - i'd like to hear your opinions first. But I'll say one thing...You think cat-backs that cost several hundred were crazy? So did I. This is something that will NOT hurt your wallet!! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Edited by request to put all vids in the 1st post: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Vids no longer work; check out Youtube! http://www.youtube.com/results?search_query=hogzaust&search_type=&aq=0&oq=hogza ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Edited by request to spill the beans: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ All that was done was to purchase 8 3/8" washers from a hardware store. Remove 2 bolts and nuts from muffler flange, remove gasket, put 2 washers on each bolt inbetween the flanges, and tighten nut back down. This creates a 1/4" gap - and this was all that was done to create your very own hogzaust. Enjoy!! Let me know what you all think!! I Love it! Thanks for the info! Link to comment Share on other sites More sharing options...
BCP2011 Posted July 19, 2009 Share Posted July 19, 2009 Just did this as well. Everything came apart pretty easily. I went "stage 2" + cut out a portion of the gasket (top portion is covered, bottom isn't), so not sure if that makes me "stage 3." Either way, it's pretty loud. I have an underground garage and people definitely don't expect that sound from my car... Thanks for the tip Hogmeat!! Link to comment Share on other sites More sharing options...
instantfury Posted July 22, 2009 Share Posted July 22, 2009 damn you rusted on bolts!!!!!! so what if i cut some lines in the pipe right after the flange on the can side? nothing big just a couple of 1" by 2" by 1/8" lines? if it sounds like crap i could always jb weld over the cuts. ?? Link to comment Share on other sites More sharing options...
rice_rocket Posted July 22, 2009 Share Posted July 22, 2009 OMG.. if you can cut your pipe, you can cut those bolts off.. eek! Link to comment Share on other sites More sharing options...
instantfury Posted July 22, 2009 Share Posted July 22, 2009 ahh yea i have one side loped off, but the bolts are stripped now. its just i have no jack or stands so my angle of cutting is extremely limited. but, in theory, could it do the same thing, exhaust leak is an exhaust leak,correct? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now