natoli4 Posted March 7, 2007 Share Posted March 7, 2007 First off I did a search but could not find anyone who has...I'd like to lift a Outback 1-2" over stock. Either springs or strut blocks would work I'm sure. I checked with Scorpion but have not heard back. Renick says they don't and they have nothing that will work for me....so can anyone help? I photoshopped this together. I want to try and put 19" volks with a +43 offset and some bigger rubber on it. Thanks Link to comment Share on other sites More sharing options...
red beast Posted March 8, 2007 Share Posted March 8, 2007 scorpion has been the only one i've seen the last couple of years you could try at outback.org but i doubt there is anything out there. keep an eye on this thread if you want specific coilovers for outbacks. he should be getting his first 20 sets in a couple of weeks. http://www.legacygt.com/forums/showthread.php?t=41524 Link to comment Share on other sites More sharing options...
natoli4 Posted March 8, 2007 Author Share Posted March 8, 2007 thanks. i'm wondering if I could make my own with some Ground Control Sleeves and some custom springs? HMMM. Link to comment Share on other sites More sharing options...
natoli4 Posted March 8, 2007 Author Share Posted March 8, 2007 Boost Junkie says I'm SOL. I asked if he can make me some custom ones...still waiting a reply. Link to comment Share on other sites More sharing options...
natoli4 Posted March 8, 2007 Author Share Posted March 8, 2007 looks like ionperformance.com make 2" lift coils for the car and they lift the car 2"! they are slightly stiffer for the extra body roll and all for a very reasonable price! looks like I'll be using these. After talking to Boost Junkie the most I'll get out of the coilovers is around 1" at best. To be continued! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.