Jump to content
LegacyGT.com

Subikid's 98GT


Recommended Posts

So I've been around fro a while now as you probably all know. I'm in college so there isn't much time or money to work on the Subi but summer is coming soon and I will be headed home to spend some much needed time on my car.:rolleyes:

 

The car the night I got it

http://i241.photobucket.com/albums/ff139/ptownhawky15/Subi/car-1.jpg

 

Maintenance/Repairs:

-Sunroof

-oil pan gasket

-valve cover gaskets

-Seafoam

-Power steering leak

 

Upgrades/Mods:

-Rally armor flaps

-Paint my rims black

-Paint my grill black

-Set of round fogs to go beside the license plate

-Roof rack if I can find one for cheap

-Repaint my car if I can afford it, same color as now

-Clock for the interior

-Paint the yellow fluid caps

-HID's

-Ebay custom intake

-"Subikid" plates

 

Current Upgrades/Mods

-Red LED lights

Instrument:

http://i241.photobucket.com/albums/ff139/ptownhawky15/Subi/CIMG1915.jpg

HVAC:

http://i241.photobucket.com/albums/ff139/ptownhawky15/Subi/CIMG2468.jpg

-Silencer Delete

-2nd Cigarette lighter/Aux cord

http://i241.photobucket.com/albums/ff139/ptownhawky15/Subi/CIMG2471.jpg

-Alpine SPS-600 Speakers all the way around

 

I currently have 168XXX on the clock right now. I got it with 154XXX as a xmas present from my parents;). Headgaskets and Tbelt were done at 154K.

Link to comment
Share on other sites

  • Replies 62
  • Created
  • Last Reply

I want a new red one haha. I cant find any good ones that have red display though. Pioneer makes one I like but it doesn't have iPod or HD radio so I wouldn't be gaining anything besides red lights.

 

Unless you know of a good one I am not aware of haha

Link to comment
Share on other sites

  • 2 weeks later...

Well I put a little work into the subi this weekend, still have more to go. Also rolled over to 169k.

 

Cleared corners:

 

http://i241.photobucket.com/albums/ff139/ptownhawky15/Subi/CIMG2492.jpg

 

I still need to find some superstar chrome 1157A bulbs because those amber bulbs look horrible.

 

A few other projects I'm working on:

-Changing the color of the LED on thew driver side window switch. Ill post a DIY.

-Painting all the wood grain black

-Painting the grill black

Link to comment
Share on other sites

Its not to hard. At 170 degrees I had them in there for about 15 minutes, but another 5 minutes would probably make it a lot easier. Just make sure when putting them back together to no get that glue everywhere. I didn't think about it and not the glue is on the chrome inside part and it looks horrible.
Link to comment
Share on other sites

getting the glue off is easy, just gotta reheat it again, get a wet paper towel and rub it off, happened to me when i was cleaning out my headlights. heating it at 250 works alil better, gives u enff time to break them open, pull the lens out and put it back together
Link to comment
Share on other sites

Maybe ill try it again then.

 

I got the LED changed out also, very easy to do.

 

There are 4 tabs to take the black cover off the back then 6 more tabs to pull the white board out.

 

http://i241.photobucket.com/albums/ff139/ptownhawky15/Subi/CIMG2512.jpg

 

The LED is right above the clear switch (driverside switch)

 

http://i241.photobucket.com/albums/ff139/ptownhawky15/Subi/CIMG2514.jpg

 

http://i241.photobucket.com/albums/ff139/ptownhawky15/Subi/CIMG2513.jpg

 

http://i241.photobucket.com/albums/ff139/ptownhawky15/Subi/CIMG0002.jpg

 

http://i241.photobucket.com/albums/ff139/ptownhawky15/Subi/CIMG2499.jpg

 

Just solder the old LED out and put a solder a new one in. Very easy to do. I bought the LEDs from radioshack part #276-1622. It is an assortment of 20 LEDs. It was the only small LEDs they had. Cost $1.99.

 

Ill take some pictures tonight when it gets dark out.

Link to comment
Share on other sites

looks good mang,

wanna trade, i wish i found a white LGT so I could match my STI

but I cant complain I found mine for 500.00 cant beat it.....

nice DIY's

 

That is a smoking deal dude!

 

Look what I did today...

 

Taped off emblem

 

http://i241.photobucket.com/albums/ff139/ptownhawky15/Subi/CIMG2521.jpg

 

Sanded down

 

http://i241.photobucket.com/albums/ff139/ptownhawky15/Subi/CIMG2522.jpg

 

First coat

 

http://i241.photobucket.com/albums/ff139/ptownhawky15/Subi/CIMG2523.jpg

 

Almost done

 

http://i241.photobucket.com/albums/ff139/ptownhawky15/Subi/CIMG2525.jpg

 

My camera died after this picture so it is charging now and I will have an install picture tomorrow.

 

Also fixed the broken corner marker with a little JB Weld :lol:

 

http://i241.photobucket.com/albums/ff139/ptownhawky15/Subi/CIMG2518.jpg

 

While the paint was drying I worked on the side skirts. I have already done this to the front bumper, mirrors, door handles and side moldings. Still have the rear bumper and spoiler to finish.

 

I am using turtle wax polishing compound and it takes most of the yellow out and cleans them up nice. Only problem is it shows all of the deep scratches better :mad:

 

You cant see it very well but the left side is done and the right isnt done yet.

 

http://i241.photobucket.com/albums/ff139/ptownhawky15/Subi/CIMG2527.jpg

 

Now I am working on changing the LED color in my aftermarket Jensen radio. Should have that done buy the end of the week then it is on to the HVAC LED's (the small ones that tell you which setting you are on)

 

BTW sorry for the crappy pictures my good camera is having issues right now, so I have to use the old 3MP POS camera.

 

Okay I'm done now ;)

Link to comment
Share on other sites

The side skirts look 100 times better now. I just need to do thew rear bumper and all my paint will match.

 

The grill is in!

 

http://i241.photobucket.com/albums/ff139/ptownhawky15/Subi/grill.jpg

 

Also I have a DIY up for changing the window switch LED color

 

http://legacygt.com/forums/showthread.php/bd-window-switch-led-135884.html

 

Waiting for some LED's to come in the mail then its onto changing the rest of my lights to red. Oh I cant wait!

Link to comment
Share on other sites

nice bro, im in the process of doin sanding my grill also

just havent decided if the chrome area is gonna be black or red.....

 

 

go red! color matching FTW

 

subikid, the grill looks sweet, along w the sideskirts! reminds me that I gotta do mine at some point haha; I'll definitely be doing the led window switch swap.

Link to comment
Share on other sites

what number sandpaper did you use?

still up in the air for red or black

id love to do red, just dont know if my red is gonna match the color of my

hood and bumper.... we shall see

 

whats next for your car?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.




×
×
  • Create New...

Important Information

Terms of Use