farmerz24 Posted April 17, 2013 Share Posted April 17, 2013 Hi All, Can anyone help. I need to dimension of the subaru single mass 5 or 6 speed flywheel to block face offset. I am going to swap in a 3900 GM V6 and keep the standard transmission. Sort of like Franksters swap but manual and the 3900 engine. Unfortunately i started my build thread on nasioc, not here. Attached is the pic of how i measured. Can someone do the same for the 5 speed single mass and the 6 speed single mass. I hope the flywheel is sticking inside the block not out. The GM's flywheel face sticks out 21mm past the block. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.