Kennyfvholla Posted October 5, 2012 Share Posted October 5, 2012 Let's see.. I'm starting this thread so those of us with a Subie that falls apart a little bit more each day, can come vent about their frustrations and discuss it with everyone else. Part of my exhaust broke today. So now it is obnoxiously loud. This on top of finding out that I may need to replace the head gaskets. Link to comment Share on other sites More sharing options...
Fido Posted October 5, 2012 Share Posted October 5, 2012 Nothing failed (it's dead, so there's not much room for more failure since I can't drive it) but this seems vaguely relevant since I partook in the complaining on the "what did you do today" thread. Somebody (who, when identified, will find themselves having to extract a 4-door sedan from their colon) left beer cans on my rear bumper and cigarette butts scattered around the trunk cover. How disrespectful of other people's property can you get?? My car is parked right outside my window, which is always open. I heard people laughing and talking after midnight, from down by the parking, but I live in off-campus student housing so drunk people are commonplace, so I didn't bother to look outside. They must've been literally leaning on my car, drinking and smoking and putting out their cigarettes on my car. People I don't know. I'm pissed off. Link to comment Share on other sites More sharing options...
Stang70Fastback Posted October 5, 2012 Share Posted October 5, 2012 *crickets chirping* Seriously. We're talking about a late 90s Subaru. Just put "does not include head gaskets, or cupholders" and we can go ahead and close this thread. Link to comment Share on other sites More sharing options...
Thomistopheles Posted October 5, 2012 Share Posted October 5, 2012 Right, because everything else is bulletproof. Nobody has ever had any problems with sensors, sun roofs, timing belts, oil seals leaking like a sieve, crank pulleys falling the **** off, transmissions eating themselves, center diffs crapping out, axles, filler necks falling apart, rear wipers burning out or seizing... Yep, nothing but head gaskets and sticky cupholders. As of last night my water pump is toast. I miss driving it already... borrowed my mother in law's Taurus to get around while I swap in my freshened up motor. This thing is unresponsive, floaty, and feels cheap compared to the scoob. Link to comment Share on other sites More sharing options...
Kennyfvholla Posted October 6, 2012 Author Share Posted October 6, 2012 *crickets chirping* Seriously. We're talking about a late 90s Subaru. Just put "does not include head gaskets, or cupholders" and we can go ahead and close this thread. Good sir, would you like the entire list of things that have failed on both of my Subaru's?? Well, don't bother asking. I'm going to tell you anyways, lol. I had my 96 GT 4EAT for about 6 months before anything went wrong. By that time it had seen many redline shifts, off road driving at least 2 to 3 times a week, a few trips to the mountains ( I think this is what did my gaskets in. The car overheated on my 15th trip up the mountain to the slope-side house. I had to bring everyones stuff up because no one else's car could make it up. It was impossible to get up by foot either. SUBARU FTW!), and only about 7k miles total. I drove around on blown head gaskets for about 4 or 5 months before I could afford to repair them. I've had to replace the: head gaskets ($350) steering rack ($100) both front axles ($150) coolant ($200 or so worth over time) radiator ($140) Total put into it to keep it going mechanically - $940 And that doesn't count my windshield, anything else I had to just replace, or the failing center diff... A few thousand miles after replacing the gaskets, my motor developed a rod knock. Spun a bearing due to the amount of times I overheated it. Well, at about that time I had just about enough with the car. So, I put it in a corner of my friends yard. And there it has sat for several months now. That brings us to my 98 GT wagon 5MT. The car that is out to destroy me.... I bought it on May 24th for $2,000 and since then (minus about a month and a half of being non-drivable it has seen about 11k miles. Most of which have been rather hard, with me rushing here and there all the time.... I knew it needed a few random things, but nothing seemed mechanically wrong with it. The timing belt, water pump, all the tensioners, clutch (shitiest thing ever), and the head gaskets had been replaced. It had a slight misfire, an exhaust leak, a bit of front end damage (I will NEVER purchase another car that has seen any structural damage even in the slightest), a fog light out, a broken rear view mirror, a sloppy shifter, a small exhaust leak, and the absolute tiniest bit of bearing noise. Some of the things that have broken since then: Clutch ($200) rad fans (replaced with sedans rad and fans) Axles ($150) exhaust coupler (haven't fixed) a shredded tire ($35 used) A/C condenser ($30) trans mount ($8) Thanks Swagon! bent tie rod (replacing rack with one from sedan and getting car aligned) my damn motor seized out of nowhere due to failed oil circulation ($300 plus for a new one) head gasket ($50) I now need struts and an alignment ($500) I now need to replace another effing head gasket ($70 gasket kit / 50 for gasket) throttle body failed (replaced with spare) total of those things - $1,393 All that in just a few months of owning it when nothing should have gone wrong. I've had a bunch of other things break or fail on me that I haven't even listed. Every time I turn around something goes wrong or breaks out of nowhere. I also have to get tires for it and replace a few other things. So that's another $600 or so into it. That's double what I paid for it. $,4000 freaking dollars. A car that's worth only $3,500 at the most with all the work that I've put into it..... Link to comment Share on other sites More sharing options...
DOHCEJ22E1 Posted October 6, 2012 Share Posted October 6, 2012 Yes, I purchased an eBay seal kit, which now has me replacing every seal I can possibly find. Already did 4 seals & replaced them w/Subaru browns. Now another leak has sprung from the cam cover on the passnger side. Yes, I TQ'd everything to spec according to the FSM. I did NOT cheap out on the rear main, thank god. Link to comment Share on other sites More sharing options...
SomethingWittyAsAUsername Posted October 6, 2012 Share Posted October 6, 2012 I bought my wagon with a bad alternator back in March. $800. Had the shop selling it replace the alternator for me (Didn't realize it was a ten minute job back then). $150. Two CV axles installed, four tires mounted and balanced, 4 wheel alignment, inspection, a battery, a replacement alternator for the replacement that blew up, power steering pump, serpentine belt, 10 wheel lugs and nuts, and one of those awesome headlight restoration kits in the silver package, I'm out about $600. Ya, I work at a parts store and know some dealerships techs $1550 spent so far. Everything except ABS works, but I'm due for a timing job, the clutch is ready to go, and I'm leaking oil from Every. Single. Seal. So it's time for a relatively cheap swap. Link to comment Share on other sites More sharing options...
Tr00b Posted October 6, 2012 Share Posted October 6, 2012 I ground the transmission only twice today, because either my clutch cable is bad, needs more lube or a synchro is going out. Some days are better than others... Other than that, we had a pretty decent day together. We held hands, and listened to the weatherband and made fun of VW owners. Link to comment Share on other sites More sharing options...
SomethingWittyAsAUsername Posted October 6, 2012 Share Posted October 6, 2012 Lol VW. Those germans have Ray Charles figuring out how to wire them Link to comment Share on other sites More sharing options...
I Donated broknindarkagain Posted October 6, 2012 I Donated Share Posted October 6, 2012 How has this thread not been created before? -broknindarkagain My Current Project - Click Here COME AND TAKE IT "The only thing necessary for the triumph of evil is for good men to do nothing." Link to comment Share on other sites More sharing options...
Kennyfvholla Posted October 6, 2012 Author Share Posted October 6, 2012 I have no idea John. Don't question it. Just go with it. Link to comment Share on other sites More sharing options...
Stasis Posted October 6, 2012 Share Posted October 6, 2012 1300 to fix all of that shit is a pretty good spend, triple that to even do half of that here... Link to comment Share on other sites More sharing options...
DOHCEJ22E1 Posted October 6, 2012 Share Posted October 6, 2012 Timing belt tensioner bolt started wobbling when I started the car so I killed it by pulling the MAF sensor plug & found that the bolt sheared out of the back plate. This is just not my weekend at all. RAGE. D:< Link to comment Share on other sites More sharing options...
Kennyfvholla Posted October 6, 2012 Author Share Posted October 6, 2012 What style tensioner? I have a spare "old" style backing plate that I could possibly spare to part with lol Link to comment Share on other sites More sharing options...
subikid90 Posted October 6, 2012 Share Posted October 6, 2012 Timing belt tensioner bolt started wobbling when I started the car so I killed it by pulling the MAF sensor plug & found that the bolt sheared out of the back plate. This is just not my weekend at all. RAGE. D:< Dude same thing happens to my white LGT two weekends ago. I cannot complain because the bolt surely had to be over tightened from the previous owner, because all of the other idler bolts were over tightened. -Subikid90 1997 Legacy GT 5spd & EJ251 w/EJ25D heads ~10.5CR 1998 Legacy GT Limited waiting for EJ22T hybrid swap Link to comment Share on other sites More sharing options...
DOHCEJ22E1 Posted October 6, 2012 Share Posted October 6, 2012 What style tensioner? I have a spare "old" style backing plate that I could possibly spare to part with lol New style back plate XD Dude same thing happens to my white LGT two weekends ago. I cannot complain because the bolt surely had to be over tightened from the previous owner, because all of the other idler bolts were over tightened. The beginning of this month is not the best time for 2nd gens! Now I have to get a back plate & that might set my exhaust back a month because I AM going to get a lightened pulley kit & brake disks. Those are definitely happening. Link to comment Share on other sites More sharing options...
SpecBamf41 Posted October 6, 2012 Share Posted October 6, 2012 when doing timing belt idlers i never tourque them to they spec, anytime you threading into aluminum thats seen a tourqued bolt more then 2-3 times. i put them heavily snug with a ratchet with thread locker. much safer imo. and before you bolt on a certain idler slide the bolt though it to make sure you got a decent amount of thread coming out. sometimes non oem idlers have a thicker spot the bolt goes though and it leaves little thread actually going into the block.. just a very useful tip. i do this with everything i can to make sure i have the right length bolt for the job. as for my own problems, my car starts like shit because i cant adjust the cold tune because i cant get my laptop to connect to my ems. i also got my foot stuck under the brake pedal and ontop of the gas pedal yesterday. i need to spread my pedals apart or get smaller feet! boots dont help either. BNR18g on 93oct Link to comment Share on other sites More sharing options...
michiganSOOB Posted October 6, 2012 Share Posted October 6, 2012 im getting off this thread before you all jinx my running, non-lemon subaru Link to comment Share on other sites More sharing options...
I Donated broknindarkagain Posted October 7, 2012 I Donated Share Posted October 7, 2012 The plug wire on cylinder 4 failed....causing all kinds of weird shit to happen. -broknindarkagain My Current Project - Click Here COME AND TAKE IT "The only thing necessary for the triumph of evil is for good men to do nothing." Link to comment Share on other sites More sharing options...
SomethingWittyAsAUsername Posted October 7, 2012 Share Posted October 7, 2012 I'm leaking more oil as of last night. Lots of oil. Gratuitous amounts of oil. Like a quart overnight. And there's now like a water slushing noise when hitting gas from idle. Now I just need an EJ25 ASAP before this poor thing dies Link to comment Share on other sites More sharing options...
monkeyposeur Posted October 8, 2012 Share Posted October 8, 2012 Where's your oil leaking from? You guys almost make me feel bad that my second gen is running so well. If it makes anyone feel better I think my throwout bearing is making noise. But I also have an SS 5MT to swap in when needed, lol. Link to comment Share on other sites More sharing options...
Tr00b Posted October 8, 2012 Share Posted October 8, 2012 Burned 2 qts of oil in about 1000 miles. Seems legit. Link to comment Share on other sites More sharing options...
I Donated broknindarkagain Posted October 8, 2012 I Donated Share Posted October 8, 2012 You drove 1000 miles in one day? Thats a lot of driving -broknindarkagain My Current Project - Click Here COME AND TAKE IT "The only thing necessary for the triumph of evil is for good men to do nothing." Link to comment Share on other sites More sharing options...
SomethingWittyAsAUsername Posted October 8, 2012 Share Posted October 8, 2012 Where's your oil leaking from? Everywhere. Front Cam and/or crank seals for sure. Oil is coming all through there. But there's oil everywhere else too. So my "slipping only when first starting out" clutch says oil sep or rear seal as well. Let's not forget oil pan. But it is EVERYWHERE. Link to comment Share on other sites More sharing options...
Tr00b Posted October 10, 2012 Share Posted October 10, 2012 You drove 1000 miles in one day? Thats a lot of driving 3 weeks it burned 2 qts in 1k... I just checked it that night and it was that low. Not leaking it thankfully Once my exhaust pipe oil change wears off I'll put some Rotella in... Brok, I've driven that many miles in a day but its not real fun. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.