SubyDude81 Posted March 5, 2014 Share Posted March 5, 2014 Ok, so I contacted Bayson R who makes replica front lips and they made one for the 2013-2014 Legacy but need someone local to test fit. They are located in San Jose, CA. I'm in NY so I can't Please email them at sales@baysonr.com so we can get this sorted out so I can finally get a front lip. Link to comment Share on other sites More sharing options...
moddingbug Posted March 5, 2014 Share Posted March 5, 2014 wow, never knew they were so close to me. I'll be picking up a 2010 lip now...haha... Link to comment Share on other sites More sharing options...
GTEASER Posted March 5, 2014 Share Posted March 5, 2014 I just sent Fredrik a text message to get over there ASAP. I did the test fit with them for the 2010+ lip. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
testa422 Posted March 5, 2014 Share Posted March 5, 2014 damn...if i wasnt east coast id help em out...looking forward to this lip however!! Link to comment Share on other sites More sharing options...
fredrik94087 Posted March 6, 2014 Share Posted March 6, 2014 I just sent Fredrik a text message to get over there ASAP. I did the test fit with them for the 2010+ lip. Damn...totally forgot. On the phone now. "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
SubyDude81 Posted March 6, 2014 Author Share Posted March 6, 2014 yes, please update us. Link to comment Share on other sites More sharing options...
fredrik94087 Posted March 6, 2014 Share Posted March 6, 2014 yes, please update us. They already had someone stop by yesterday. It fits and will take about 2 months or so before it is ready to ship. I asked about a ducktail spoiler similar to the corazon spoiler on japanparts. They may do it if there is enough interest. "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
GTEASER Posted March 6, 2014 Share Posted March 6, 2014 ^^^yeah, I had them all excited about that when I went for my test fit in Dec '12 and assured them there would be sufficient interest. We even held a Lexus IS spoiler up to my car and we talked about the look that would be different from all other spoilers available at the time and that it would be very attractive. They ignored my follow-up. When I was there they had also talked about lengthening one of the side skirts that they make for the Impreza and even measured for it. Still haven't seen that product either. They kinda have a mind of their own and I don't quite understand their marketing strategies. I could tell them til I was blue in the face that there would be hundreds interested and it seemed to go right out the other ear. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
fredrik94087 Posted March 6, 2014 Share Posted March 6, 2014 I stopped by today anyway. I wanted to see how it fits on my car. They did a very good job integrating the squarish lip of the bumper into the new lip. About 1/4" of the bumper is covered by the liip, and it uses OEM mounting points. The lip is maybe 1.5" long and goes down at about a 30 degree angle. It makes that square bumper look a LOT better. Again, at least 2 months away as a lot of STI guys have needs. I asked, but they said no pics. "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
SubieMT Posted March 7, 2014 Share Posted March 7, 2014 OMG a front lip for the 13'-14' front?! *spazzes* Link to comment Share on other sites More sharing options...
fredrik94087 Posted March 7, 2014 Share Posted March 7, 2014 OMG a front lip for the 13'-14' front?! *spazzes* And it looks very good. I just couldn't take any pics! "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
MRLancaster Posted March 8, 2014 Share Posted March 8, 2014 Is it like the STi lip for the Legacy or completely different style? Link to comment Share on other sites More sharing options...
fredrik94087 Posted March 8, 2014 Share Posted March 8, 2014 Is it like the STi lip for the Legacy or completely different style? As I described it...it is different and maybe better IMHO. "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
Hanger Posted March 24, 2014 Share Posted March 24, 2014 Very good news Now I can stop busting my brain on how I can fix the front end up. Now moving on towards the rest of the car... ○ ○ ○ Instagram: itshangertime :spin: ○ ○ ○ Link to comment Share on other sites More sharing options...
Hanger Posted March 24, 2014 Share Posted March 24, 2014 Does the lip stick out further than comparing to mine?http://img.tapatalk.com/d/14/03/25/eju6uvup.jpghttp://img.tapatalk.com/d/14/03/25/7e6usysu.jpg Sent from my Xperia Z ○ ○ ○ Instagram: itshangertime :spin: ○ ○ ○ Link to comment Share on other sites More sharing options...
fredrik94087 Posted March 24, 2014 Share Posted March 24, 2014 It is an extension of the front end. It doesn't look like a separate piece when it is installed. Imagine for a second that the flat front bottom edge of your bumper (at 90 degrees) which is about 1" or so...is now at a 45 degree and extended 1". The lip follows the bottom edge of the 2013/2014 bumper and becomes part of the bumper. I really wish they allowed a pic or that I snuck a pic. Trust me, it looks good. "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
Hanger Posted March 24, 2014 Share Posted March 24, 2014 I can visualize it now. Thanks ○ ○ ○ Instagram: itshangertime :spin: ○ ○ ○ Link to comment Share on other sites More sharing options...
SubieMT Posted March 25, 2014 Share Posted March 25, 2014 Any idea when this lip is going to hit the market? Link to comment Share on other sites More sharing options...
GTEASER Posted March 25, 2014 Share Posted March 25, 2014 They already had someone stop by yesterday. It fits and will take about 2 months or so before it is ready to ship. I asked about a ducktail spoiler similar to the corazon spoiler on japanparts. They may do it if there is enough interest. Here you go. 1 page back. And dated 3/5/14 I would say early Maybe. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
fredrik94087 Posted March 25, 2014 Share Posted March 25, 2014 Here you go. 1 page back. And dated 3/5/14 I would say early Maybe. May-be even later as they were hot and heavy on wrx and sti pieces. I can't wait either. "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
linksusmaximus Posted March 25, 2014 Share Posted March 25, 2014 6 to 12.. Link to comment Share on other sites More sharing options...
MRLancaster Posted March 25, 2014 Share Posted March 25, 2014 I'm still having a hard time visualizing your description. Link to comment Share on other sites More sharing options...
fredrik94087 Posted March 25, 2014 Share Posted March 25, 2014 I'm still having a hard time visualizing your description. It is not that hard...just read my mind. LOL Better yet...it will be a surprise. Patience is the hard part. "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
Clean13 Posted March 25, 2014 Share Posted March 25, 2014 From what I read it seems like it is going to have a similar shape as the garage door seal home-made "lips" just way better. I'm sure it is going to look nice. Does it go over the front of the bumper at all to make it look as if its molded? Link to comment Share on other sites More sharing options...
fredrik94087 Posted March 25, 2014 Share Posted March 25, 2014 From what I read it seems like it is going to have a similar shape as the garage door seal home-made "lips" just way better. I'm sure it is going to look nice. Does it go over the front of the bumper at all to make it look as if its molded? It looks like I'm gonna need to get creative with microsoft paint tonight. "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.