SRI From CosmoRacing, Trouble Installing

I recently bought the CosmoRacing SRI, but upon taking out the stock intake, there are only 3 ports on the intake, but it seems like it may need 4. It also would appear that the intake tube won't fit easily into the area designated for it.

Does anyone have actual pictures of the CosmoRacing SRI installed on an 08-09 nonturbo Legacy?

Here's the link http://www.cosmoracing.com/productinfo.asp?cid=226&pid=1948

Thanks for your time.

I recently bought the CosmoRacing SRI, but upon taking out the stock intake, there are only 3 ports on the intake, but it seems like it may need 4. It also would appear that the intake tube won't fit easily into the area designated for it.

 

Does anyone have actual pictures of the CosmoRacing SRI installed on an 08-09 nonturbo Legacy?

 

Here's the link http://www.cosmoracing.com/productinfo.asp?cid=226&pid=1948

 

Thanks for your time.

You should be fine with three I would believe? The ventilation tubes on each side of the block and a tube up top? I don't remember the exact location, but I had to deal with this on my CAI. I needed three nipples for three tubes, but only had two, so I needed a t-connector to allow both tubes to ventilate into the intake.

Honestly, the SRI may be more trouble than its worth, its going to throw CELs and cause you to run lean. You can't really expect to throw on an intake and expect any gains unless you tune, which will still probably be an insignificant gain on a non-turbo model. Oh wait...you'll gain a ton of noise