Moddiction Posted February 23, 2013 Share Posted February 23, 2013 Does anyone know of any reputable install shops familiar with working on legacy GT's anywhere close to western ma? I am in the berkshires right by ct and ny border. I have a few parts I need installed and too cold out for me to do it myself right now and don't have a whole lot of time anyways. Need a downpipe installed and turbo inspection while dp is off and remove the banjo filter. Also need the grimmspeed ebcs installed and a boost leak test performed. I am getting ready for a stage 2 tune so just need to make sure everything is in order before hand. I know there are a bunch of shops over by Boston but would rather not drive 3 hours each way if possible. Let me know if you have any suggestions. Thanks! -Ryan. WWW.MODDICTION.COM Moddiction Stainless steel and Titanium shift knobs. Drivetrain, suspension, brakes, exhaust, cooling, fuel, gauges+MUCH more! Link to comment Share on other sites More sharing options...
SCASEYS Posted February 23, 2013 Share Posted February 23, 2013 It's a bird, it's a plane it's.... Underdog I donated to LegacyGT.com which allows me to have this nifty signature. If anything SCASEYS posts ever becomes a sticky i'm gonna light this whole place on fire Link to comment Share on other sites More sharing options...
Moddiction Posted February 23, 2013 Author Share Posted February 23, 2013 They are over by Boston right? WWW.MODDICTION.COM Moddiction Stainless steel and Titanium shift knobs. Drivetrain, suspension, brakes, exhaust, cooling, fuel, gauges+MUCH more! Link to comment Share on other sites More sharing options...
Underdog Posted February 23, 2013 Share Posted February 23, 2013 Thank you for the reference sir! Even Ayer is pretty far from you, so some other options would be ESP in Sterling and EFI in CT. Of course I would be happy to help you if you decide to use my services! The Crimson Dynamo Link to comment Share on other sites More sharing options...
Moddiction Posted February 23, 2013 Author Share Posted February 23, 2013 How far are you from Brentuning? If nearby maybe I will go there to get parts put on and then take the drive to Brentuning on the way back to get tuned. WWW.MODDICTION.COM Moddiction Stainless steel and Titanium shift knobs. Drivetrain, suspension, brakes, exhaust, cooling, fuel, gauges+MUCH more! Link to comment Share on other sites More sharing options...
Underdog Posted February 25, 2013 Share Posted February 25, 2013 I'm about 45 minutes past Brentuning from your neck of the woods. It might be more convenient to use Motive or PSItuning since they are in the Worcester area and probably have a waiting area on premise. I do not at the moment. Again, if you do decide to use my services I will be happy to help! The Crimson Dynamo Link to comment Share on other sites More sharing options...
robitrice Posted February 25, 2013 Share Posted February 25, 2013 PSItuning is where Bren does his tuning and Motive is actually in Woburn which is prob a 30-40min drive east of worcester depending on which way you go. Another is Kaizen Tuning in Acton, MA off of RT2 they work on alot of cars and almost exclusively with GTR's but also with Subarus and EVO's. For what you are looking to get done especially the dp install and turbo check you could prob go to a reputable shop near you who you trust and have no problems. Install the EBCS the day of the tune it takes like 15 minutes and i am sure someoone would help you if you had questions. Are you going to the Dynoday through Bren? Link to comment Share on other sites More sharing options...
grovlet Posted February 26, 2013 Share Posted February 26, 2013 My car just arrived at ECS Performance in Windsor CT Link to comment Share on other sites More sharing options...
Moddiction Posted February 26, 2013 Author Share Posted February 26, 2013 Oh ok cool. So would psi tuning be doing it if I called them for installs or would it be brentuning? WWW.MODDICTION.COM Moddiction Stainless steel and Titanium shift knobs. Drivetrain, suspension, brakes, exhaust, cooling, fuel, gauges+MUCH more! Link to comment Share on other sites More sharing options...
Nrw Posted February 26, 2013 Share Posted February 26, 2013 Bren just does tuning Link to comment Share on other sites More sharing options...
Moddiction Posted February 26, 2013 Author Share Posted February 26, 2013 Ok cool. I'll call up psi tuning to hopefully get it all done at once. WWW.MODDICTION.COM Moddiction Stainless steel and Titanium shift knobs. Drivetrain, suspension, brakes, exhaust, cooling, fuel, gauges+MUCH more! Link to comment Share on other sites More sharing options...
Moddiction Posted February 26, 2013 Author Share Posted February 26, 2013 Still confused sorry. So does he rent the dyno to tune there? Or is he the only tuner there and psi tuning just does mechanical work? Going to call them up this afternoon. WWW.MODDICTION.COM Moddiction Stainless steel and Titanium shift knobs. Drivetrain, suspension, brakes, exhaust, cooling, fuel, gauges+MUCH more! Link to comment Share on other sites More sharing options...
Nrw Posted February 26, 2013 Share Posted February 26, 2013 He rents their dyno They mostly build hondas. Link to comment Share on other sites More sharing options...
Moddiction Posted February 26, 2013 Author Share Posted February 26, 2013 Ah ok cool. That's what I figured. WWW.MODDICTION.COM Moddiction Stainless steel and Titanium shift knobs. Drivetrain, suspension, brakes, exhaust, cooling, fuel, gauges+MUCH more! Link to comment Share on other sites More sharing options...
Moddiction Posted February 26, 2013 Author Share Posted February 26, 2013 Just called psi and they didn't seem to sure about working on Subaru's so don't think I will want them for the install really. WWW.MODDICTION.COM Moddiction Stainless steel and Titanium shift knobs. Drivetrain, suspension, brakes, exhaust, cooling, fuel, gauges+MUCH more! Link to comment Share on other sites More sharing options...
SlickSpur Posted February 28, 2013 Share Posted February 28, 2013 Any luck? I'm also looking for a place to do maintenance stuff. Link to comment Share on other sites More sharing options...
Moddiction Posted February 28, 2013 Author Share Posted February 28, 2013 I might just wind up going down to PA to Evans tuning. One of the best tuners around if not the best in the Honda scene but also does a lot of subis and Evos. I had my S2000 tuned there and been perfect for 55k miles at 410whp so might do that. Bit more of a drive and more expensive but great tuner! WWW.MODDICTION.COM Moddiction Stainless steel and Titanium shift knobs. Drivetrain, suspension, brakes, exhaust, cooling, fuel, gauges+MUCH more! Link to comment Share on other sites More sharing options...
ChachiFBaby Posted February 28, 2013 Share Posted February 28, 2013 ESP in Sterling does good work, tune with Bren. Just my $0.02 Link to comment Share on other sites More sharing options...
Moddiction Posted February 28, 2013 Author Share Posted February 28, 2013 Do you know if when tuning the Cobb AP if he tunes off the Stage 2 tune or starts from scratch cell by cell? WWW.MODDICTION.COM Moddiction Stainless steel and Titanium shift knobs. Drivetrain, suspension, brakes, exhaust, cooling, fuel, gauges+MUCH more! Link to comment Share on other sites More sharing options...
Nrw Posted February 28, 2013 Share Posted February 28, 2013 Do you know if when tuning the Cobb AP if he tunes off the Stage 2 tune or starts from scratch cell by cell? He starts off from scratch. He has his own maps that he's been perfecting since he started tuning subarus in 2003. Link to comment Share on other sites More sharing options...
Moddiction Posted February 28, 2013 Author Share Posted February 28, 2013 ok yeah thats good. I will probably go there since it is a bit cheaper, much closer and sounds like a great tuner! Only wish psi tuning sounded like they were able to work on a subaru. Gave me zero confidence when I asked them said they usually work on mostly Honda's. WWW.MODDICTION.COM Moddiction Stainless steel and Titanium shift knobs. Drivetrain, suspension, brakes, exhaust, cooling, fuel, gauges+MUCH more! Link to comment Share on other sites More sharing options...
I Donated Too luchadorjose Posted February 28, 2013 I Donated Too Share Posted February 28, 2013 ECS performance in windsor locks, ct is closest to you. But the work you're talking about is easily done with hand tools, i've done it on both of my legacy's, as well as countless similar installs with my friends Link to comment Share on other sites More sharing options...
Moddiction Posted February 28, 2013 Author Share Posted February 28, 2013 Yeah I know it is. I've done almost all installs on my S2000 myself including sc etc. I just don't really have the time right now and driveway is always icy and wet. No garage currently. So I'd rather just have a shop do it quick before tuning it since I'd have to be there anyways. WWW.MODDICTION.COM Moddiction Stainless steel and Titanium shift knobs. Drivetrain, suspension, brakes, exhaust, cooling, fuel, gauges+MUCH more! Link to comment Share on other sites More sharing options...
Ellesedil Posted February 28, 2013 Share Posted February 28, 2013 What about ESP? They're a vendor on here located in Sterling, MA. http://legacygt.com/forums/member.php?u=31576 http://www.enhancedstreetperformance.com/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.