SpecBamf41 Posted January 14, 2013 Share Posted January 14, 2013 This entire thing is being done on a tablet so excuse the auto correct mistakes. So hears goes nothing. I got parts and parts from my 96 sedan and then the stuff that's been gutted out of the wagon. And then other stuff. Leave to boot camp on Feb 4th so don't delay or your screwed out of all these rare parts. My paypal is joeswagon@gmail.com Location: MN 56472 Phone: 218 251 1070 only if you need to. Text only during 7-4 central. I try to check sales every morning before and at noon on lunch. And nights are a shot In hell. put what you payed for in the payment along with address. First to pay gets it. My time is limited. Please post here what you bought so noons else buys its twice. -----SOLD ITEAMS---- snowboard all weather wagon mat. filter and adaptor, maf still for sale. Gauge cluster First is the cargo cover for wagons. 50 shipped http://img.tapatalk.com/d/13/01/15/vapymupa.jpg Then the cargo weather mat 70 shipped sold http://img.tapatalk.com/d/13/01/15/ebaguvuq.jpg Then a sedan tail light 30 shipped 4eat starter that's been sandblasted and new contacts. 50 shipped http://img.tapatalk.com/d/13/01/15/upa3aten.jpg Then the sedan center garnish. 50 shipped http://img.tapatalk.com/d/13/01/15/6ema4ahu.jpg -Center counsel arm rest 15 shipped -Ebrake cover with starter switch holes 10 shipped. Good for fun then revert to stock with your oem one - silver hood scoop from my deer God moment. John I know you want this to hang on your wall. Free for John. 10 shipped http://img.tapatalk.com/d/13/01/15/pebuduma.jpg Cruise control. 25 shipwd http://img.tapatalk.com/d/13/01/15/3u2adava.jpg Air box. 25 shipped http://img.tapatalk.com/d/13/01/15/5utamu3u.jpg 7mm oil pump. 20 shipped Sedan body panel. 20 shipped Abs sensor. 30 shipped http://img.tapatalk.com/d/13/01/15/3a8avezy.jpg Sent from my SCH-I800 using Tapatalk 2 BNR18g on 93oct Link to comment Share on other sites More sharing options...
SpecBamf41 Posted January 14, 2013 Author Share Posted January 14, 2013 See anything else you want Metal oil seperater plate. Must have for any one who don't. 15 shipped Block with devcon block garud. 150 shipped Just needs align hone 2009 Sti pistons. 50 shipped Home made short shifter. About a 3.5 inch throw. 30 shipped Coil pack. 20 shipped http://img.tapatalk.com/d/13/01/15/6aqu4e3e.jpghttp://img.tapatalk.com/d/13/01/15/bequ5apa.jpghttp://img.tapatalk.com/d/13/01/15/egedu9yd.jpghttp://img.tapatalk.com/d/13/01/15/u3ynygyq.jpg Sent from my SCH-I800 using Tapatalk 2 BNR18g on 93oct Link to comment Share on other sites More sharing options...
SpecBamf41 Posted January 14, 2013 Author Share Posted January 14, 2013 Found more sheit. Air bags. Both. http://img.tapatalk.com/d/13/01/15/ubagu4ab.jpg Leather door cards wrapped in sti blue. Also have more fabric to do another set. http://img.tapatalk.com/d/13/01/15/9yre9ery.jpg Sent from my SCH-I800 using Tapatalk 2 BNR18g on 93oct Link to comment Share on other sites More sharing options...
Stasis Posted January 14, 2013 Share Posted January 14, 2013 I'll buy your adorable plump cat Link to comment Share on other sites More sharing options...
SpecBamf41 Posted January 14, 2013 Author Share Posted January 14, 2013 16 pound American short hair. Chilliest cant ever. We vaccuum it weekly and I pick it up by its legs and it just sits there purring upside down. Great cat. Used. 230 plus shipping. The one in the picture is less chill. 50 bucks. Sent from my SCH-I800 using Tapatalk 2 BNR18g on 93oct Link to comment Share on other sites More sharing options...
SpecBamf41 Posted January 14, 2013 Author Share Posted January 14, 2013 Also have a new gauge cluster with zero miles. http://img.tapatalk.com/d/13/01/15/gyqa4ene.jpg Enkei. 18x7. Nitto performance 205/45 Set of 4 all balenced. 3000-4000 miles 600 plus grey hound shipping before this week end. 850 on monday http://img.tapatalk.com/d/13/01/16/senajere.jpghttp://img.tapatalk.com/d/13/01/16/5uveqaha.jpg Sent from my SCH-I800 using Tapatalk 2 BNR18g on 93oct Link to comment Share on other sites More sharing options...
jp71ss Posted January 14, 2013 Share Posted January 14, 2013 What would the STI pistons compression be? Standard size? The block looks interesting. Link to comment Share on other sites More sharing options...
Kiyo1990 Posted January 14, 2013 Share Posted January 14, 2013 Hey, how much for arm rest cover? As well, will the wagon mat fit a sedan? I apologize for a stupid ? Link to comment Share on other sites More sharing options...
onimitsu Posted January 14, 2013 Share Posted January 14, 2013 How much for just the Maf adaptor? Link to comment Share on other sites More sharing options...
SpecBamf41 Posted January 15, 2013 Author Share Posted January 15, 2013 What would the STI pistons compression be? Standard size? The block looks interesting. All depends on your heads. But it would lower your compression a bit. 99.5 pistons. Had like 30 thousand on them from a wreck sti. The block is a creation of mine that's been decked. And honed. And then the devcon block gaurd. Needs an align hone. 100 plus shipping Hey, how much for arm rest cover? As well, will the wagon mat fit a sedan? I apologize for a stupid ? Idk about the mat fitting a sedan but you could always cut it to fit. The armrest would be 15-20 shipped How much for just the Maf adaptor? 25 shipped and comes with a mint cone filter (Not the one in pic) and clamp Sent from my SCH-I800 using Tapatalk 2 BNR18g on 93oct Link to comment Share on other sites More sharing options...
Tr00b Posted January 15, 2013 Share Posted January 15, 2013 PM Sent... Where the heck are you located? Link to comment Share on other sites More sharing options...
monkeyposeur Posted January 15, 2013 Share Posted January 15, 2013 How much do you want for the coil pack? Have you checked the resistance of the primary and secondaries? Zip 84105 Link to comment Share on other sites More sharing options...
SpecBamf41 Posted January 15, 2013 Author Share Posted January 15, 2013 im in mn. 56472. and i have not check the coil pack, i pulled it from a car in a junk yard and looked to be the only new part on that car. bought it, put in on the 96 sedan, then it made its way onto the 97 then got replaced by the msd. if your serious i can solder the connector back on if i can find it. if the number check out and you want it still id do 20 shipped. BNR18g on 93oct Link to comment Share on other sites More sharing options...
SpecBamf41 Posted January 15, 2013 Author Share Posted January 15, 2013 M Make offers guys. Most of its worth nothin to me. I'm gone in 20 days Sent from my SCH-I800 using Tapatalk 2 BNR18g on 93oct Link to comment Share on other sites More sharing options...
WESTcoast Posted January 15, 2013 Share Posted January 15, 2013 do you have the stereo center "fake wood" surround? Link to comment Share on other sites More sharing options...
jamaha51 Posted January 16, 2013 Share Posted January 16, 2013 Is that cluster brand new and how much? Link to comment Share on other sites More sharing options...
zangado1 Posted January 16, 2013 Share Posted January 16, 2013 How much for the arm rest cover and the Rear mat? And where are you located? Link to comment Share on other sites More sharing options...
SpecBamf41 Posted January 16, 2013 Author Share Posted January 16, 2013 do you have the stereo center "fake wood" surround? i think my car had the fake wood. If so idk if its not in the car. 7plus shipping Is that cluster brand new and how much? Ok I lie. Its not brand brand new. The glass and all the bezels are used. Idk what its worth. What ever you wanna pay to save it from hell shipped How much for the arm rest cover and the Rear mat? And where are you located? I believe I answered everyone of your questions. Mat is spoken for but he never payed me and its been 12 hours. 70 shipped. Shipping kill on the mat. Its 30-40 bucks. Sent from my SCH-I800 using Tapatalk 2 BNR18g on 93oct Link to comment Share on other sites More sharing options...
SpecBamf41 Posted January 16, 2013 Author Share Posted January 16, 2013 Prices added. Contact info and location. Sent from my SCH-I800 using Tapatalk 2 BNR18g on 93oct Link to comment Share on other sites More sharing options...
Tr00b Posted January 16, 2013 Share Posted January 16, 2013 Paid for wagon rear mat price we agreed on. Thanks! Do not need cat already have one that looks like that Link to comment Share on other sites More sharing options...
jamaha51 Posted January 16, 2013 Share Posted January 16, 2013 pm sent Link to comment Share on other sites More sharing options...
SpecBamf41 Posted January 16, 2013 Author Share Posted January 16, 2013 Paid for wagon rear mat price we agreed on. Thanks! Do not need cat already have one that looks like that you never never have to many cats. if its worth doing its worth over doing BNR18g on 93oct Link to comment Share on other sites More sharing options...
SpecBamf41 Posted January 17, 2013 Author Share Posted January 17, 2013 Also selling 30 feet of el wire. With sound active module. Sent from my SCH-I800 using Tapatalk 2 BNR18g on 93oct Link to comment Share on other sites More sharing options...
Tr00b Posted January 17, 2013 Share Posted January 17, 2013 Build me a Tron cat with el wire and deal. Man I wish those rims were 17s And you were closer.. ... That is a smoking deal... the pics don't do those wheels justice Link to comment Share on other sites More sharing options...
WESTcoast Posted January 17, 2013 Share Posted January 17, 2013 ^ I will double what he offers for a tron cat! Pm sent about the wood grain Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.