Redryan98 Posted September 5, 2013 Share Posted September 5, 2013 Hi All. I just picked up an 07 Legacy GT and am getting caught up on the maintenance. Next on my list is remove the banjo bolt screen. I got all the way through this DIY before realizing it was specific to 05-06 model year. Not fun doing that work for nothing I haven't found a good DIY for 07+. As I understand it the turbo inlet needs to be removed for access. Tried searching for Turbo inlet removal without much luck either. Can someone point me in the direction of a DIY for either? Link to comment Share on other sites More sharing options...
ibr_adam09 Posted September 5, 2013 Share Posted September 5, 2013 3 clamps to remove. Intake clamp Bpv clamp Turbo clamp Then remove rubber beather hoses Allen bolt atop the inlet Should pull out. You'll find a bango screen on the oil line going towards the acvs It's tight. ( twss) Link to comment Share on other sites More sharing options...
Redryan98 Posted September 5, 2013 Author Share Posted September 5, 2013 ^Cool. Thanks! Link to comment Share on other sites More sharing options...
ibr_adam09 Posted September 5, 2013 Share Posted September 5, 2013 Alot easier said than done, so might want to save a full day if new at 'these' things. Link to comment Share on other sites More sharing options...
Redryan98 Posted September 6, 2013 Author Share Posted September 6, 2013 Appreciate the heads up. This is my first Subaru but I do have a couple friends more familiar with the setup and willing to guide me. Link to comment Share on other sites More sharing options...
jp233 Posted September 6, 2013 Share Posted September 6, 2013 The difference between 05-06 and 07+ is that the turbo line has a different routing on the aft end of the passenger cylinder head. looky: http://opposedforces.com/parts/legacy/us_b13/type_7/engine/cylinder_head/illustration_1/ Link to comment Share on other sites More sharing options...
Redryan98 Posted September 6, 2013 Author Share Posted September 6, 2013 ^ thats very helpful, thanks! Definitely a whole new world for me, being my first boxter Link to comment Share on other sites More sharing options...
jbangoy Posted September 7, 2013 Share Posted September 7, 2013 *boxer Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.