Viking1980 Posted January 29, 2013 Share Posted January 29, 2013 can I swap a 1995 legacy 2.2 inton my 1993 legacy 2.2? What are something I need to look for interms of issues with the swap? Link to comment Share on other sites More sharing options...
monkeyposeur Posted January 29, 2013 Share Posted January 29, 2013 I think the only difference is the 95 22 has egr. Is your car auto or manual? Link to comment Share on other sites More sharing options...
Viking1980 Posted January 29, 2013 Author Share Posted January 29, 2013 manual Link to comment Share on other sites More sharing options...
monkeyposeur Posted January 29, 2013 Share Posted January 29, 2013 Why do you need to swap? Usually the 22s go forever. The 95 22 will have egr and may have some wiring differences but I'm not sure about that. If you swap your 93 intake mani over along with the sensors I don't think you would have any problems. Some of the sensors may be interchangeable but swapping the intak mani would get rid of the egr problem. Link to comment Share on other sites More sharing options...
Viking1980 Posted January 29, 2013 Author Share Posted January 29, 2013 timeing belt popped so i figured for the cost of the kit with pulleys, belt and water pump i can get a whole engine out of a 95 for $300$ off a freind. Link to comment Share on other sites More sharing options...
Viking1980 Posted January 29, 2013 Author Share Posted January 29, 2013 Then i can rebuild the 2.2 out of the 93. and have another backup with a little more power. Link to comment Share on other sites More sharing options...
monkeyposeur Posted January 29, 2013 Share Posted January 29, 2013 You can get a timing kit with pulleys and idlers and water pump on eBay for $125. A nice Gates kit will be more. The 22s are non interference so if your timing belt broke there won't be any internal engine damage. It's cheaper and easier just to do the timing belt and pulleys compared to swapping. How many miles are on your engine? Link to comment Share on other sites More sharing options...
Viking1980 Posted January 29, 2013 Author Share Posted January 29, 2013 I was told the 2.2 were interference motors thats why i figured just swap in stead of goin through the whole head ache of the bent vales to tell you the truth I'm not sure of the miles i just bought the car for 200 as is. the price I got was from from napa for the kit. Link to comment Share on other sites More sharing options...
Viking1980 Posted January 29, 2013 Author Share Posted January 29, 2013 it was 369 through napa Link to comment Share on other sites More sharing options...
Viking1980 Posted January 29, 2013 Author Share Posted January 29, 2013 thanks for the info monkeyposeur Link to comment Share on other sites More sharing options...
monkeyposeur Posted January 29, 2013 Share Posted January 29, 2013 The 22s went interference in 97. So no need to worry about valve damage. Happy to help! Link to comment Share on other sites More sharing options...
pleaidestar Posted January 29, 2013 Share Posted January 29, 2013 I don't think manual tran 2.2's have egr on them, f they do egr delete is easy I did one on my 95 motor, just take it out and plug the holes on the head and manifold with m16x125 bolts. Your ecu will tell you you have an egr code in diagnostics...but it doesn't affect the way the motor runs. Link to comment Share on other sites More sharing options...
pleaidestar Posted January 29, 2013 Share Posted January 29, 2013 You can leave the valve body on the manifold with your vacuum lines going to the switching solenoid, or just make a block off plate or get one off a newer 2.2 that is equipped with a standard transmission ...easy as cake, if you don't mind a trouble code. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.