Zac88 Posted November 18, 2012 Share Posted November 18, 2012 So I have a broken TGV sensor, one nearest the turbo so I was never able to replace it, luckily it broke while the motors were fully open so I have not had any issues driving at all except an annoying CEL. My question is if I flash to Cobb Stage 1 and use AccessTuner to disable the code will it cause issues such as the motors going all nuts or will I be fine? I have purchased replacement full TGVs if thats the case. http://www.westernsubaruclub.com/smf/Themes/default/images/icons/modify_inline.gif Link to comment Share on other sites More sharing options...
Zac88 Posted November 19, 2012 Author Share Posted November 19, 2012 Nobody knows? Link to comment Share on other sites More sharing options...
Spec B Posted November 21, 2012 Share Posted November 21, 2012 I don't think anyone has had that very specific scenario your are describing. I am thinking you should be fine with a stage 1 map. But you should probably just fix it right to be safe. Link to comment Share on other sites More sharing options...
Mill Posted November 22, 2012 Share Posted November 22, 2012 You could always delete the TGVs and disable the code and never worry about them ever again. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.