Jump to content
LegacyGT.com

2006+ WRX Flywheel


Recommended Posts

Hello,

 

I am new to this forum and am planning on doing some clutch work to my 2005 LGT. I want to replace the dual mass flywheel with a 2006+ WRX single mass flywheel.

 

Does anyone have suggests on flywheel suppliers or possibly have one they are willing to sell?

Link to comment
Share on other sites

Check out the TSK3 TOB kit to. Its recommended whe ndoing this job.

 

Get it from one of the vendors like AZPinstalls.com or m sprank.

305,600miles 5/2012 ej257 short block, 8/2011 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. (SOLD).  CHECK your oil, these cars use it.

 

Engine Build - Click Here

Link to comment
Share on other sites

I have the stock flywheel out of my 06 WRX, but it has 80k miles and needs resurfaced. Assuming it can be resurfaced, it'll be about 5 pounds lighter than your dual mass.

 

I went with an ACT Streetlite in my WRX. It revs up quickly, but is still heavy enough to avoid CELs and stalling issues. Other than OEM,

It's cool; I'm with the band
Link to comment
Share on other sites

@OP just make sure you get the single mass clutch to go along with it.

 

-Mike Paisan

 

http://www.pbase.com/paisan/image/91072632.jpg http://www.pbase.com/paisan/image/145749898/original.jpg http://www.pbase.com/paisan/image/133406601.jpg http://www.whiteline.com.au/images/logos/perf1.jpg

11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.

Call directly as We carry almost every manufacturer now, so before you buy parts call us.

Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs

"Race Tested, Enthusiast Approved!"

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

Terms of Use