nstg8r Posted October 2, 2014 Share Posted October 2, 2014 Only two mounting points may be a concern. I can't imagine just two bolts in those locations would be stiff enough. By contrast, the Cusco MCB has six bolts holding it in place. Link to comment Share on other sites More sharing options...
Rogue77 Posted October 2, 2014 Share Posted October 2, 2014 Can you provide a link to the cusco MCB? I'm just here for the mods. Link to comment Share on other sites More sharing options...
nstg8r Posted October 2, 2014 Share Posted October 2, 2014 Can you provide a link to the cusco MCB? http://legacygt.com/forums/showthread.php/brake-master-cylinder-bracei-203004.html Link to comment Share on other sites More sharing options...
7soobs Posted October 6, 2014 Share Posted October 6, 2014 Ok so the single 6-rib LCP for the '15 WRX won't fit on our cars, but... The more common 2 belt pulley will. "But Dave! We only have one belt, and it's got 6 ribs!" So? I've been running a 5 rib belt (a NAPA 25050650) for the past few months as an experiment. I haven't had an issue yet, regardless of alternator load, hitting the steering lock, etc. So... I put this baby on with my 5 rib belt. The 5 ribs on the pulley line up with the 5 forward-most ribs on the accessories. Went from 5lbs 11oz to 1lb 4oz (2590g to 565g). http://i.imgur.com/kxa23GL.jpg Link to comment Share on other sites More sharing options...
s2baru Posted October 6, 2014 Share Posted October 6, 2014 Uhoh...shit is about to hit the fan. Link to comment Share on other sites More sharing options...
jackal8788 Posted October 7, 2014 Share Posted October 7, 2014 Splatter time is eminent... VF54 to 20G to VF54 to 18G build thread Link to comment Share on other sites More sharing options...
fredrik94087 Posted October 7, 2014 Share Posted October 7, 2014 Jdm version 7 2002 wrx brembo brakes are 5x100...can get a whole set front and rear for 1200 $...should I or shouldn't I go for it?..brakes calipers, rotors, pads included Make sure your wheels clear the brembos. Mine dont.... "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
Yoshi Subie Posted October 8, 2014 Share Posted October 8, 2014 Yes I realize this is a sticky thread, but I didn't make a thread specific for this install, so if you're not following me, I was the guinea pig for the OB bumper. The very first and only BM to have this done  Link to comment Share on other sites More sharing options...
Ninja2k7 Posted October 14, 2014 Share Posted October 14, 2014 Not sure if this is he right thread to post this on but has anybody in this forum installed a supercharger on your legacy? Link to comment Share on other sites More sharing options...
Picky1 Posted October 15, 2014 Share Posted October 15, 2014 Not sure if this is he right thread to post this on but has anybody in this forum installed a supercharger on your legacy? Check out ItalianLegacy's build thread...3.6 Supercharged Legacy! http://legacygt.com/forums/showthread.php/italianlegacy-3-6r-official-thread-227730.html Link to comment Share on other sites More sharing options...
GKfromNJ Posted November 20, 2014 Share Posted November 20, 2014 (edited) Yes I realize this is a sticky thread, but I didn't make a thread specific for this install, so if you're not following me, I was the guinea pig for the OB bumper. The very first and only BM to have this done  What year outback did you get the bumper from? Edited November 21, 2014 by GKfromNJ Link to comment Share on other sites More sharing options...
Perscitus Posted November 25, 2014 Share Posted November 25, 2014 http://jp-carparts.com/subaru/figlist.php?maker=subaru&car_baseid=F23000&type=B14&cartype=005 Link to comment Share on other sites More sharing options...
Ninja2k7 Posted November 28, 2014 Share Posted November 28, 2014 Yes I realize this is a sticky thread, but I didn't make a thread specific for this install, so if you're not following me, I was the guinea pig for the OB bumper. The very first and only BM to have this done  I like what you did to your car...i noticed you put you have a "SUS" for the car you drive which that to me pretty much describes it minus for the two tone. My mom has the 1999 limited SUS and i gotta give subaru props for building a well engineered vehicle. Its smooth, its got guts bc of the 2.5L block and its an outback sedan:) Link to comment Share on other sites More sharing options...
Yoshi Subie Posted December 5, 2014 Share Posted December 5, 2014 what year outback did you get the bumper from? 2013 Link to comment Share on other sites More sharing options...
siggy15 Posted December 9, 2014 Share Posted December 9, 2014 Yes I realize this is a sticky thread, but I didn't make a thread specific for this install, so if you're not following me, I was the guinea pig for the OB bumper. The very first and only BM to have this done   for now... haha im on the hunt for the bumper. Link to comment Share on other sites More sharing options...
GTEASER Posted December 9, 2014 Share Posted December 9, 2014 dat scoop!!!.. it really detracts from the looks IMO. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
jackal8788 Posted December 10, 2014 Share Posted December 10, 2014 I would have to agree with GTEASER on this one, but the best part is that it's your ride so customize as you see fit. I drive a vengeful panda so I'm not here to judge. VF54 to 20G to VF54 to 18G build thread Link to comment Share on other sites More sharing options...
brandon.mol Posted December 10, 2014 Share Posted December 10, 2014 I think it looks funny because its so far up the hood. Needs to be a 6 -12" forward. Link to comment Share on other sites More sharing options...
islandborn Posted December 31, 2014 Share Posted December 31, 2014 Brz rear dba 4000 rotors fit. Link to comment Share on other sites More sharing options...
fahr_side Posted January 1, 2015 Share Posted January 1, 2015 dat scoop!!!.. it really detracts from the looks IMO.  I've tuned a few GTs with these scoop 'extender' trims. None of them increase the (already very restrictive) scoop area and a few even narrow it. On most of these cars I have to back the timing off a degree or two to avoid det. Obligatory '[URL="http://legacygt.com/forums/showthread.php/2008-gh8-238668.html?t=238668"]build thread[/URL]' Increased capacity to 2.7 liters, still turbo, but no longer need spark plugs. Link to comment Share on other sites More sharing options...
Rutchard Posted January 1, 2015 Share Posted January 1, 2015 I've tuned a few GTs with these scoop 'extender' trims. None of them increase the (already very restrictive) scoop area and a few even narrow it. On most of these cars I have to back the timing off a degree or two to avoid det. The one recently in this thread isn't even a GT, just a pep boys hoodscoop probably stuck on with double sided tape. A 2.5i faking the funk. Link to comment Share on other sites More sharing options...
GTEASER Posted January 1, 2015 Share Posted January 1, 2015 ^^^ but very interesting to know that the CyberR and Corazon big bulge scoop "enhancers" do nothing and may actually hinder TMIC functionality. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
s2baru Posted January 1, 2015 Share Posted January 1, 2015 I still want the corazon so bad though!!!! Link to comment Share on other sites More sharing options...
GTEASER Posted January 1, 2015 Share Posted January 1, 2015 ^^Yeah, the CyberR is on my list. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
frenchy Posted January 2, 2015 Share Posted January 2, 2015 + 1 on the Ciyber R.That scoop is damm sexy. I dont speak English to good but I French alot. Link to comment Share on other sites More sharing options...
Recommended Posts