ssulb Posted March 4, 2016 Share Posted March 4, 2016 I have a 2010 Legacy and I wanted to replace the headlights with LED headlights I recently got. I tried to remove the back cover by twisting in the direction of the arrow but it can't even budge. Any suggestions? I can reach it with my hand through the plastic fender. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
ssulb Posted March 4, 2016 Author Share Posted March 4, 2016 http://uploads.tapatalk-cdn.com/20160304/f2f151f4a187e08f2f6b494c306c2b2c.jpg Will not even budge. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
cww516 Posted March 4, 2016 Share Posted March 4, 2016 I had to use a screwdriver and a hammer to knock mine loose. Make sure the plastic isn't too cold when you do that, though- not sure how cold it has to be before it starts getting brittle, but I'd hate to find out the hard way. Link to comment Share on other sites More sharing options...
GTEASER Posted March 4, 2016 Share Posted March 4, 2016 Heat up the housing, not the cover, with a heat gun and it should break free pretty easily. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Swannee225 Posted March 5, 2016 Share Posted March 5, 2016 Best bet... remove the bumper it's way easier and only takes a few minutes Link to comment Share on other sites More sharing options...
ssulb Posted March 7, 2016 Author Share Posted March 7, 2016 Yeah I am going to end up removing the bumper and do everything nice. I need to replace some of those plastic screws cause they fell out somehow and my bumper is loose. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.